Origin200 To O2, Onyx2, And Ibm Compatible (Db9 To Db9) - Silicon Graphics Origin200 Owner's Manual

Origin200 to O2, Onyx2, and IBM Compatible (DB9 to DB9)

This serial cable connects an Origin200 to Silicon Graphics O2 and Onyx2 workstations,
and IBM compatibles with a DB9 serial port.
Table B-4 shows the cable connector pin assignments.
Table B-4 Connector Pin Assignments for an Origin200 to O2, Onyx2, and IBM Compatible
Serial Cable
Pin Number Signal
(DB9 Female)
1 Data Carrier Detect (DCD)
2 Receive Data (RXD)
3 Transmit Data (TXD)
4 Data Terminal Ready (DTR)
5 Ground (GND)
6 Data Set Ready (DSR)
7 Request To Send (RTS)
8 Clear To Send (CTS)
9 N/C
Pin Number Signal
(DB9 Female)
4 DTR
3 TXD
2 RXD
1 DCD
5 GND
N/C N/C
8 CTS
7 RTS
N/C N/C
Serial Cables
239