Origin200 To Macintosh Cable (Db9 To Din-8) - Silicon Graphics Origin200 Owner's Manual

Origin200 to Macintosh Cable (DB9 to DIN-8)

This cable connects any Macintosh computer to an Origin200 system.
Table B-6 shows the cable connector pin assignments.
Table B-6 Connector Pin Assignments for an Origin200 to Macintosh Serial Cable
Pin Number Signal
(DB9 Female)
1 Data Carrier Detect (DCD)
2 Receive Data (RXD)
3 Transmit Data (TXD)
4 Data Terminal Ready (DTR)
5 Ground (GND)
6 Data Set Ready (DSR)
7 Request To Send (RTS)
8 Clear To Send (CTS)
9 (Not Connected)
Pin Number Signal
(DIN-8 Male)
8 RXD+
3 TXD–
5 RXD–
7 GPi
6 TXD+
4 GND
N/C N/C
2 HSKi
1 HSKo
N/C N/C
Serial Cables
241