SIP User's Manual
3.
Add a Region for your deployed devices, by performing the following:
a.
In the MG Tree, right-click the Globe
Region dialog box appears.
b.
In the 'Region Name' field, enter a name for the Region (e.g., a geographical
name).
c.
Click OK
4.
Verify that the device is up and running (by performing a ping to its IP address).
5.
Add the device's software version file to the Software Manager (refer to ''Upgrading the
Device's Software''
6.
Add the device to the region, by performing the following:
a.
Right-click the Region
choose Add MG
b.
Enter an arbitrary name for the device, and then in the 'IP Address' field, enter the
device's IP address
c.
Ensure that 'IPSec Enabled' check box is selected, and then enter the IPSec
Preshared Key (defined in Configuring IPSec on page 204).
d.
Click
Version 5.8
Figure 5-3: Adding a Region
; the Region is added to the MG Tree list.
on page
221
).
icon that you added, and then from the shortcut menu,
; the MG Information dialog box appears.
Figure 5-4: Defining the IP Address
OK; the device is added to the Region and appears listed in the MGs List.
5. Element Management System (EMS)
icon, and then click Add Region
207
; the
October 2009