Figure 5-3: Adding A Region - AudioCodes Mediant 800 MSBG User Manual

SIP User's Manual
3. Add a Region for your deployed device, by performing the following:
a. In the MG Tree, right-click the Globe
Region dialog box appears.
b. In the 'Region Name' field, enter a name for the Region (e.g., a geographical
name), and then click OK; the Region is added to the MG Tree list.
4. Verify that the device is up and running (by performing a ping to its IP address).
5. Add the device to the Region, by performing the following:
a. Right-click the added Region
Add MG; the MG Information dialog box appears.
b. Enter an arbitrary name for the device, and then in the 'IP Address' field, enter the
device's IP address
c. Click OK; the device is added to the Region and appears listed in the MGs List.
Note:
Version 6.2

Figure 5-3: Adding a Region

Figure 5-4: Defining the IP Address
The Pre-shared Key string defined in the EMS must be identical to the one
that you defined for the device. When IPSec is enabled, default IPSec/IKE
parameters are loaded to the device.
icon, and then click Add Region; the
icon, and then from the shortcut menu, choose
375
5. EMS-Based Management
February 2011