Figure 5-3: Adding A Region; Figure 5-4: Defining The Ip Address - AudioCodes Mediant 2000 User Manual

SIP User's Manual
3. Add a Region for your deployed device, by performing the following:
a. In the MG Tree, right-click the Globe
Region dialog box appears.
b. In the 'Region Name' field, enter a name for the Region (e.g., a geographical
name), and then click OK
4. Verify that the device is up and running (by performing a ping to its IP address).
5. Add the device to the Region, by performing the following:
a. Right-click the added Region
Add MG
b. Enter an arbitrary name for the device, and then in the 'IP Address' field, enter the
device's IP address
c. Ensure that 'IPSec Enabled' check box is selected, and then enter the IPSec
Preshared Key (defined in Configuring IPSec on page 204).
d. Click
Note:
Version 6.0

Figure 5-3: Adding a Region

; the Region is added to the MG Tree list.
; the MG Information dialog box appears.

Figure 5-4: Defining the IP Address

OK ; the device is added to the Region and appears listed in the MGs List.
The Pre-shared Key string defined in the EMS must be identical to the one
that you defined for the device. When IPSec is enabled, default IPSec/IKE
parameters are loaded to the device.
5. Element Management System (EMS)
icon, and then click Add Region
icon, and then from the shortcut menu, choose
207
; the
March 2010