Table 3-35: Snmp V3 Users Parameters - AudioCodes Mediant 2000 User Manual

SIP User's Manual
Parameter
Index
[SNMPUsers_Index]
User Name
[SNMPUsers_Username]
Authentication Protocol
[SNMPUsers_AuthProtocol]
Privacy Protocol
[SNMPUsers_PrivProtocol]
Authentication Key
[SNMPUsers_AuthKey]
Privacy Key
[SNMPUsers_PrivKey]
Group
[SNMPUsers_Group]
3.4.1.1.4 Configuring SNMP Trusted Managers
The 'SNMP Trusted Managers' page allows you to configure up to five SNMP Trusted
Managers, based on IP addresses. By default, the SNMP agent accepts SNMP Get and
Set requests from any IP address, as long as the correct community string is used in the
request. Security can be enhanced by using Trusted Managers, which is an IP address
from which the SNMP agent accepts and processes SNMP requests.

To configure the SNMP Trusted Managers:
1. Access the 'Management Settings' page, as described in ''Configuring the
Management Settings''
Version 5.8

Table 3-35: SNMP V3 Users Parameters

The table index.
The valid range is 0 to 9.
Name of the SNMP v3 user. This name must be unique.
Authentication protocol of the SNMP v3 user.

[0] None (default)

[1] MD5

[2] SHA-1
Privacy protocol of the SNMP v3 user.

[0] None (default)

[1] DES

[2] 3DES

[3] AES-128

[4] AES-192

[5] AES-256
Authentication key. Keys can be entered in the form of a text
password or long hex string. Keys are always persisted as long hex
strings and keys are localized.
Privacy key. Keys can be entered in the form of a text password or
long hex string. Keys are always persisted as long hex strings and
keys are localized.
The group with which the SNMP v3 user is associated.

[0] Read-Only (default)

[1] Read-Write

[2] Trap
Note: All groups can be used to send traps.
on page 164 .
169
3. Web-Based Management
Description
October 2009