Table 3-38: Snmp V3 Users Parameters - AudioCodes Mediant 2000 User Manual

SIP User's Manual
Notes:
Parameter
Index
[SNMPUsers_Index]
User Name
[SNMPUsers_Username]
Authentication Protocol
[SNMPUsers_AuthProtocol]
Privacy Protocol
[SNMPUsers_PrivProtocol]
Authentication Key
[SNMPUsers_AuthKey]
Privacy Key
[SNMPUsers_PrivKey]
Group
[SNMPUsers_Group]
3.4.1.1.4 Configuring SNMP Trusted Managers
The 'SNMP Trusted Managers' page allows you to configure up to five SNMP Trusted
Managers, based on IP addresses. By default, the SNMP agent accepts SNMP Get and
Set requests from any IP address, as long as the correct community string is used in the
request. Security can be enhanced by using Trusted Managers, which is an IP address
from which the SNMP agent accepts and processes SNMP requests.
Version 6.0
•
For a description of the web interface's table command buttons (e.g.,
Duplicate and Delete), refer to ''Working with Tables''
•
You can also configure SNMP v3 users using the ini file table parameter
SNMPUsers (refer to ''SNMP Parameters''
Table 3-34: SNMP V3 Users Parameters
The table index.
The valid range is 0 to 9.
Name of the SNMP v3 user. This name must be unique.
Authentication protocol of the SNMP v3 user.

[0] None (default)

[1] MD5

[2] SHA-1
Privacy protocol of the SNMP v3 user.

[0] None (default)

[1] DES

[2] 3DES

[3] AES-128

[4] AES-192

[5] AES-256
Authentication key. Keys can be entered in the form of a text
password or long hex string. Keys are always persisted as long hex
strings and keys are localized.
Privacy key. Keys can be entered in the form of a text password or
long hex string. Keys are always persisted as long hex strings and
keys are localized.
The group with which the SNMP v3 user is associated.

[0] Read-Only (default)

[1] Read-Write

[2] Trap
Note: All groups can be used to send traps.
Description
167
3. Web-Based Management
on page 34
on page 257 ).
March 2010
.