4.
Click the Apply button to save your changes.
5.
To save the changes, see ''Saving Configuration'' on page 336.
Notes:
Parameter
Index
[SNMPUsers_Index]
User Name
[SNMPUsers_Username]
Authentication Protocol
[SNMPUsers_AuthProtocol]
Privacy Protocol
[SNMPUsers_PrivProtocol]
Authentication Key
[SNMPUsers_AuthKey]
Privacy Key
[SNMPUsers_PrivKey]
Group
[SNMPUsers_Group]
SIP User's Manual
•
For a description of the web interface's table command buttons (e.g.,
Duplicate and Delete), see ''Working with Tables'' on page 53.
•
You can also configure SNMP v3 users using the ini file table parameter
SNMPUsers (see ''SNMP Parameters'' on page 679).
Table 3-10: SNMP V3 Users Parameters
The table index.
The valid range is 0 to 9.
Name of the SNMP v3 user. This name must be unique.
Authentication protocol of the SNMP v3 user.
[0] None (default)
[1] MD5
[2] SHA-1
Privacy protocol of the SNMP v3 user.
[0] None (default)
[1] DES
[2] 3DES
[3] AES-128
[4] AES-192
[5] AES-256
Authentication key. Keys can be entered in the form of a text
password or long hex string. Keys are always persisted as long hex
strings and keys are localized.
Privacy key. Keys can be entered in the form of a text password or
long hex string. Keys are always persisted as long hex strings and
keys are localized.
The group with which the SNMP v3 user is associated.
[0] Read-Only (default)
[1] Read-Write
[2] Trap
Note: All groups can be used to send traps.
Description
82
Mediant 800 MSBG
Document #: LTRT-12804