Table 3-34: SNMP Community Strings Parameters Description
Parameter
Community String
Trap Community String
[SNMPTrapCommunityString]
3.4.1.1.3 Configuring SNMP V3 Users
The 'SNMP V3 Settings' page allows you to configure authentication and privacy for up to
10 SNMP v3 users.
To configure the SNMP v3 users:
1.
Access the 'Management Settings' page, as described in ''Configuring the
Management Settings''
2.
In the 'SNMP V3 Table' field, click the right-pointing arrow
Settings' page appears.
3.
To add an SNMP v3 user, in the 'Add' field, enter the desired row index, and then click
Add
. A new row appears.
4.
Configure the SNMP V3 Setting parameters according to the table below.
5.
Click the Apply
6.
To save the changes, refer to ''
Notes:
SIP User's Manual
Read Only [SNMPReadOnlyCommunityString_x]:
read-only community strings (up to 19 characters each). The
default string is 'public'.
Read / Write
five read / write community strings (up to 19 characters each).
The default string is 'private'.
Community string used in traps (up to 19 characters).
The default string is 'trapuser'.
on page
Figure 3-95: SNMP V3 Setting Page
button to save your changes.
Saving Configuration''
•
For a description of the web interface's table command buttons (e.g.,
Duplicate and Delete), refer to ''Working with Tables''
•
You can also configure SNMP v3 users using the ini file table parameter
SNMPUsers (refer to ''SNMP Parameters''
Description
[SNMPReadWriteCommunityString_x]:
164
.
on page
168
Mediant 2000
Up to five
Up to
button; the 'SNMP V3
173
.
on page
34
.
on page
257
).
Document #: LTRT-68809