SIP User's Manual
4.
Click the Submit button to save your changes.
5.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 190.
Note:
Table 3-36: SNMP Community Strings Parameters Description
Parameter
Community String
Trap Community String
[SNMPTrapCommunityString]
3.4.1.1.3 Configuring SNMP V3 Users
The 'SNMP V3 Settings' page allows you to configure authentication and privacy for up to
10 SNMP v3 users.
To configure the SNMP v3 users:
1.
Access the 'Management Settings' page, as described in ''Configuring the
Management Settings'' on page 181.
2.
In the 'SNMP V3 Table' field, click the right-pointing arrow
Settings' page appears.
3.
To add an SNMP v3 user, in the 'Add' field, enter the desired row index, and then click
Add. A new row appears.
4.
Configure the SNMP V3 Setting parameters according to the table below.
Version 5.8
To delete a community string, select the Delete check box corresponding to
the community string that you want to delete, and then click Submit.
Read Only [SNMPReadOnlyCommunityString_x]: Up to five
read-only community strings (up to 19 characters each). The
default string is 'public'.
Read / Write [SNMPReadWriteCommunityString_x]: Up to
five read / write community strings (up to 19 characters each).
The default string is 'private'.
Community string used in traps (up to 19 characters).
The default string is 'trapuser'.
Figure 3-96: SNMP V3 Setting Page
Description
185
3. Web-Based Management
button; the 'SNMP V3
September 2009