SIP User's Manual
To configure the Management parameters:
1.
Open the 'Management Settings' page (Management tab > Management
Configuration menu > Management Settings
2.
Configure the management settings. In addition, you can configure the following
SNMP settings:
•
SNMP Trap Destinations: Click the arrow
destinations (refer to ''Configuring the SNMP Trap Destinations Table''
166
•
SNMP Community String: Click the arrow
community strings (refer to ''Configuring the SNMP Community Strings''
167
•
SNMP V3 Table: Click the arrow
(refer to ''Configuring SNMP V3 Table''
•
SNMP Trusted Managers: Click the arrow
Trusted Managers (refer to ''Configuring SNMP Trusted Managers''
3.
Click the Submit
4.
To save the changes to flash memory, refer to ''
Version 5.8
Figure 3-92: Management Settings Page
).
).
button to save your changes.
page item).
button to configure the SNMP trap
button to configure the SNMP
button to configure the SNMP V3 users
on page
168
button to configure the SNMP
Saving Configuration''
165
3. Web-Based Management
on page
on page
).
on page
on page
173
October 2009
169
).
.