Loading A Scenario To The Device; Figure 3-18: Scenario File Page - AudioCodes MediaPack MP-124 User Manual

To save a Scenario to a PC, take these 5 steps:
1. On the Navigation bar, click the Scenarios tab; the Scenario appears in the
Navigation tree.
2. Click the Get/Send Scenario File button (located at the bottom of the Navigation
tree); the 'Scenario File' page appears, as shown below:
3. Click the Get Scenario File button; the 'File Download' window appears.
4. Click Save, and then in the 'Save As' window navigate to the folder to where you want
to save the Scenario file. When the file is successfully downloaded to your PC, the
'Download Complete' window appears.
5. Click Close to close the 'Download Complete' window.
3.3.5.5

Loading a Scenario to the Device

Instead of creating a Scenario, you can load a Scenario file (data file) from your PC to the
device.
To load a Scenario to the device, take these 4 steps:
1. On the Navigation bar, click the Scenarios tab; the Scenario appears in the
Navigation tree.
2. Click the Get/Send Scenario File button (located at the bottom of the Navigation
tree); the 'Scenario File' page appears (refer to ''Saving a Scenario to a PC'' on page
39).
SIP User's Manual

Figure 3-18: Scenario File Page

40
MediaPack Series
Document #: LTRT-65410