Editing A Scenario - AudioCodes MediaPack MP-118 User Manual

User's Manual
Item
background.
5 Navigation buttons for navigating between Scenario Steps:

Next

Previous
Note:
4.1.8.3

Editing a Scenario

You can modify a Scenario as described in the procedure below.
Note:

To edit a Scenario:
1. Open the Scenario.
2. Click the Edit Scenario button located at the bottom of the Navigation pane; the
'Scenario Name' and 'Step Name' fields appear.
3. You can perform the following edit operations:
•
Add Steps:
a.
b.
c.
d.
•
Add or Remove Parameters:
a.
b.
c.
d.
•
Edit Step Name:
a.
b.
c.
Version 6.6
button to open the next Step listed in the Scenario
button to open the previous Step listed in the Scenario
If you reset the device while in Scenario mode, after the device resets, you
are returned once again to the Scenario mode.
Only Security Administrator Web users can edit a Scenario.
On the Navigation bar, select the desired tab (i.e., Configuration or
Maintenance); the tab's menu appears in the Navigation tree.
In the Navigation tree, navigate to the desired page item; the corresponding
page opens in the Work pane.
On the page, select the required parameters by marking their corresponding
check boxes.
Click Next.
In the Navigation tree, select the required Step; the corresponding page
opens in the Work pane.
To add parameters, select the check boxes corresponding to the desired
parameters.
To remove parameters, clear the check boxes corresponding to the desired
parameters.
Click Next.
In the Navigation tree, select the required Step.
In the 'Step Name' field, modify the Step name.
On the page, click Next.
Description
53
4. Web-Based Management
MP-11x & MP-124