Editing A Scenario - AudioCodes Mediant 600 User Manual

3.1.8.3

Editing a Scenario

You can modify a Scenario anytime by adding or removing Steps (i.e., pages) or
parameters, and changing the Scenario name and the Steps' names.
Note:

To edit a Scenario:
1. On the Navigation bar, click the Scenarios tab; a message box appears, requesting
you to confirm Scenario loading.
2. Click OK; the Scenario appears with its Steps in the Navigation tree.
3. Click the Edit Scenario button located at the bottom of the Navigation pane; the
'Scenario Name' and 'Step Name' fields appear.
4. You can perform the following edit operations:
•
Add Steps:
a.
b.
c.
d.
•
Add or Remove Parameters:
a.
b.
c.
•
Edit the Step Name:
a.
b.
c.
•
Edit the Scenario Name:
a.
b.
•
Remove a Step:
a.
b.
c.
5. After clicking Next, a message box appears notifying you of the change. Click OK.
6. Click Save & Finish; a message box appears informing you that the Scenario has
been successfully modified. The Scenario mode is exited and the menus of the
Configuration tab appear in the Navigation tree.
SIP User's Manual
Only users with access level of 'Security Administrator' can edit a Scenario.
On the Navigation bar, select the desired tab (i.e., Configuration or
Maintenance); the tab's menu appears in the Navigation tree.
In the Navigation tree, navigate to the desired page item; the corresponding
page opens in the Work pane.
In the page, select the required parameters, by marking the corresponding
check boxes.
Click Next.
In the Navigation tree, select the required Step; the corresponding page
opens in the Work pane.
To add parameters, select the check boxes corresponding to the desired
parameters; to remove parameters, clear the check boxes corresponding to
the parameters that you want removed.
Click Next.
In the Navigation tree, select the required Step.
In the 'Step Name' field, modify the Step name.
In the page, click Next.
In the 'Scenario Name' field, edit the Scenario name.
In the displayed page, click Next.
In the Navigation tree, select the required Step; the corresponding page
opens in the Work pane.
In the page, clear all the check boxes corresponding to the parameters.
Click Next.
44
Mediant 600 & Mediant 1000
Document #: LTRT-83308