Figure 3-125: Software Upgrade Key With Multiple S/N Lines - AudioCodes Mediant 1000 User Manual

•
Multiple S/N lines (as shown below):

Figure 3-125: Software Upgrade Key with Multiple S/N Lines

a.
b.
5. Verify that the Software Upgrade Key file was successfully loaded to the device, by
using one of the following methods:
•
In the 'Key features' group, ensure that the features and capabilities activated by
the installed string match those that were ordered.
•
Access the Syslog server (refer to the Product Reference Manual) and ensure
that the following message appears in the Syslog server:
"S/N___ Key Was Updated. The Board Needs to be Reloaded with ini file\n".
6. Reset the device; the new capabilities and resources are active.
Note:
3.4.2.2.1 Loading via BootP/TFTP
The procedure below describes how to load a Software Upgrade Key to the device using
AudioCodes' BootP/TFTP Server utility (for a detailed description on the BootP utility, refer
to the Product Reference Manual

To load a Software Upgrade Key file using BootP/TFTP:
1. Place the Software Upgrade Key file (typically, a *.txt file) in the same folder in which
the device's cmp
2. Start the BootP/TFTP Server utility.
3. From the Services menu, choose Clients; the 'Client Configuration' screen is
displayed.
SIP User's Manual
in the 'Send Upgrade Key file' field, click the Browse
the folder in which the Software Upgrade Key text file is located on your PC.
Click the Send File button; the new key is loaded to the device and
validated. If the key is valid, it is burned to memory and displayed in the
'Current Key' field.
If the Syslog server indicates that the Software Upgrade Key file was
unsuccessfully loaded (i.e., the 'SN_' line is blank), perform the following
preliminary troubleshooting procedures:
1. Open the Software Upgrade Key file and check that the S/N line
appears. If it does not appear, contact AudioCodes.
2. Verify that you've loaded the correct file. Open the file and ensure that
the first line displays [LicenseKeys].
3. Verify that the contents of the file has not been altered in any way.
).
file is located.
204
Mediant 600 & Mediant 1000
button and navigate to
Document #: LTRT-83306