Table of Contents
Advertisement
COMBI P1: Controllers
1–1: Controllers Setup
1–1a
1–1b
1–1c
Here, you can assign the functions performed by SW1 and
SW2, and by knobs 1–4 when control surface REALTIME
CONTROL B mode is selected.
Note: SW1 and SW2 can be controlled by the SW1 and SW2
switches.
Note: The Panel Switch Assign setting of the program
assigned to each timbre will have no effect.
1–1a: Combination, Tempo
Bank, Combination Number & Name
These are the bank, number, and name of the current
Combination.
For more information, please see "0–1(2)a: Combination
Select" on page 80.
(Tempo)
For more information, please see " (Tempo)" on page 81.
1–1b: Panel Switch Assign
SW (SW1 Assign)
This assigns the function of SW1. For more information,
please see "List of SW 1/2 assignments" on page 382.
Note: If the on/off status of the front panel SW1, SW2
switches is memorized when you save the combination.
If you change the function setting, the status is reset to off.
Mode (SW1 Mode)
This specifies the on/off operation when you press the SW1
switch.
Toggle: The state will alternate between On and Off each
time you press the SW1 switch.
Momentary: The state will remain On only while you
continue holding down the SW1 switch.
SW2 (SW2 Assign)
Mode (SW2 Mode)
This assigns the function of SW2. The functions that can be
assigned to SW2 are the same as for SW1, with the
substitution of SW2 Mod. (CC#81) instead of the SW1's SW1
Mod. (CC#80).
1–1
Menu
[040.00...300.00, EXT]
[Off, ..., JS-Y Lock]
[Toggle, Momentary]
[Off, ..., JS-Y Lock]
[Toggle, Momentary]
COMBI P1: Controllers 1–1: Controllers Setup
1–1c: Realtime Control Knob Assign
Here you can select the functions (mainly types of control
change) that are assigned to knobs 1–4 when the control
surface REALTIME CONTROL switch has selected B mode.
(See "Realtime Control Knobs 1–4 Assignments" on
page 383)
The functions you assign here are active when you use the
CONTROL ASSIGN REALTIME CONTROL switch to select
B mode, and operate knobs 1–4.
Knob 1–B
Knob 2–B
Knob 3–B
Knob 4–B
▼1–1: Menu Command
• 0: Write Combination ☞p.120
• 1: Exclusive Solo ☞p.73
• 2: Copy from Program ☞p.120
For more information, please see "Combination: Menu
Command" on page 120.
[Off, ..., MIDI CC#119]
[Off, ..., MIDI CC#119]
[Off, ..., MIDI CC#119]
[Off, ..., MIDI CC#119]
91
Advertisement
Table of Contents
