2-3: Eq T01-08, 2-4: Eq T09-16 - Korg M50-88 Parameter Manual

Sequencer mode
2–3: EQ T01–08,
2–4: EQ T09–16
2–3a
2–3b
2–3c
Here, you can adjust the settings for the mid-sweepable
three-band EQ for each MIDI track.
2–3(4)a: Track Select, Tempo, RPPR
2–3(4)b: Track Info
For more information, please see "2–1: Trim T01–08, 2–2:
Trim T09–16" on page 149.
2–3(4)c: 3 Band Parametric EQ
Track 01 (Track Number):
High Gain [dB]
This controls the gain of the 10 kHz High Shelf EQ, in
increments of 0.5 dB.
Mid Freq [Hz] (Mid Frequency)
This sets the center frequency for the Mid sweep EQ.
Mid Gain [dB]
This controls the gain of the Mid Sweep EQ, in increments of
0.5 dB.
Low Gain [dB]
This controls the gain of the 80 Hz Low Shelf EQ, in
increments of 0.5 dB.
Track 02...08, 09...16 (Track Number):
These parameters adjust the three-band EQ (with sweepable
mid range) for MIDI tracks 2–8 and 9–16. They are the same
as for track 1. For more information, please see "Track 01
(Track Number):," above.
150
2–3
Menu
[–18.0...+00.0...+18.0]
[100...10k]
[–18.0...+00.0...+18.0]
[–18.0...+00.0...+18.0]
▼2–3(4): Menu Command
• 0: Memory Status ☞p.191
• 1: Exclusive Solo ☞p.73
• 2: Rename Song ☞p.191
• 3: Delete Song ☞p.191
• 4: Copy From Song ☞p.191
• 5: Load Template Song ☞p.191
• 6: Save Template Song (Save as User Template
Song) ☞p.192
• 7: FF/REW Speed ☞p.192
• 8: Set Location (Set Location for Locate Key) ☞p.192
• 9: GM Initialize ☞p.193
• 10: Copy From Combi (Copy from
Combination) ☞p.194
• 11: Copy from Program ☞p.195
For more information, please see "Sequencer: Menu
Command" on page 191.