Seq P9: Mfx/Tfx (Master/Total Effect); 9-1: Routing - Korg M50-88 Parameter Manual

Sequencer mode

SEQ P9: MFX/TFX (Master/Total Effect)

Here, you can adjust the settings for the master effects and
the total effect. For instance, you can:
• Route a sound to the master effects and the total effect
• Make detailed settings for the master effects and the
total effect
For more information, please see "Effect Guide" on
page 271.
9–1: Routing
9–1a
9–1b
9–1c
• Here, you can specify the type of master effects and total
effect, and turn them On/Off.
• The master effects are sent to the L/R bus. The total
effect is inserted into the L/R bus.
These parameters are the same as in Program mode. For
more information, please see "9–1: Routing" on page 70.
9–1a: Track Select
For more information, please see "2–1: Trim T01–08, 2–2:
Trim T09–16" on page 149.
9–1b: MFX1, 2
MFX1:
MFX1
MFX1 On/Off
Return 1
MFX2:
MFX2
MFX2 On/Off
Return 2
Chain:
Chain On/Off
Chain Direction
Chain Level
For more information, please see "9–2: MFX1" on page 71.
180
[000...170]
[Off, On]
[000...127]
[000...153]
[Off, On]
[000...127]
[Off, On]
[MFX1→MFX2, MFX2→MFX1]
[000...127]
9–1c: TFX
TFX:
TFX
TFX On/Off
For more information, please see "9–4: TFX" on page 72.
9–1d: Master Volume
Master Volume
9–1
For more information, please see "9–1c: Master Volume" on
Menu
page 71.
▼9–1: Menu Command
• 0: Memory Status ☞p.191
9–1b
• 1: Exclusive Solo ☞p.73
• 2: Copy Insert Effect ☞p.76
• 3: Swap Insert Effect ☞p.76
9–1d
• 4: FF/REW Speed ☞p.192
• 5: Set Location (Set Location for Locate Key) ☞p.192
• 6: Put Effect Setting to Track ☞p.204
For more information, please see "Sequencer: Menu
Command" on page 191.
[000...153]
[Off, On]
[000...127]