Modulation
Mod Knobs
You can use the Mod Knobs in real-time performance, and also save the results as new sounds. The names and values
are shown on the main PERFORM screen. The values are stored, and can themselves be modulated by the wheels,
Kaoss Physics, and MIDI CCs. The Mod Knobs can control either or both Layers at once. Each knob sends and
receives a MIDI CC; see "MIDI CC Assign" on page 94.
(Name)
The Mod Knobs can be named; there's room for about 12 characters on the main Perform page.
To edit the name:
1.
Select the name parameter.
2.
Press ENTER.
The Name page appears. For more information, see "Editing names" on page 15.
Polarity
[+, -/+]
Each Mod Knob can be either unipolar (+) or bipolar (+/-).
+ (Unipolar)
0
+100
-100
(Value)
[–100.0...+100.0]
This is the current value of the Mod Knob. When Polarity is +, values are positive only.
Modulation Sources
Controllers
Off
This means that no modulation source is selected.
Mod Wheel CC 1
This is the built-in Mod Wheel (unipolar MIDI CC#1).
-/+ (Bipolar)
0
+100
67