Controllers > Hand Controllers; Controllers > Foot Controllers - Korg Pa3XLe User Manual

Professional arranger
Table of Contents

Advertisement

Controllers > Hand Controllers
In this page you can program those controls you can operate
with your hands.
Keyboard Settings
Velocity Curve
This parameter sets the sensitivity of the keyboard to your touch.
Fixed
No dynamic control available. Dynamic values
are fixed, as in classic organs. When this option is
chosen, you can set the fixed velocity value:
Soft1 ... Hard3
Curves, from the lightest one to the hardest one.
A.Touch Curve
This parameter sets the sensitivity of the keyboard to the pres-
sure you apply after first pressing a key.
Soft1 ... Hard3 Curves, from the lightest to the hardest one.
Off
The aftertouch is turned off.
Balance Control
Balance Control
The BALANCE knob can either be used to mix between the
Keyboard and Accompaniment/Song tracks, or to control the
Accompaniment/Song Volume without changing the Keyboard
tracks. This is always a relative control, whose effective maxi-
mum value is determined by the MASTER VOLUME slider
position.
Note: The BALANCE knob only works in the Style Play and Song
Play modes.
Acc/Song - Kbd Balance
While in Style Play and Song Play mode, the
BALANCE knob balances the volume of the Key-
board (Kbd) tracks against the Style (Accompani-
ment), Song and Pad tracks.
Acc/Song Volume
While in Style Play and Song Play mode, the
BALANCE knob controls the volume of the Style
(Accompaniment), Song and Pad tracks.
Controllers > Hand Controllers
Controllers > Foot Controllers
This page lets you select a function to the Assignable Pedal/Foot-
switch, and select the polarity for the Damper and Assignable
Pedal/Footswitch.
The following (optional) Korg pedals are compatible with
Pa3XLe:
Type
Model
Continuous
EXP-2, XVP-10
(Volume/Expression)
Switch
PS-1, PS-3
Damper
DS-1H (supporting half-pedalling)
Pedal/Footswitch
Function
Function assigned to a continuous (i.e., volume/expression)
pedal, or to a footswitch, connected to the ASSIGNABLE
PEDAL connector. See page 437 for a list of the assignable func-
tions. The first functions are switch-type functions, while the
remaining (starting from Master Volume) are continuous-like
functions.
Calibration
Use this button to calibrate and choose the polarity of the pedal/
footswitch.
Connect the pedal or footswitch to the ASSIGNABLE
1.
PEDAL connector on the back of the instrument.
Go to this page, and touch the "Calibration" button in the
2.
display. The following dialog box appears:
You are asked to set the pedal to the maximum value. Press
3.
the footswitch, or press the pedal to the maximum position
(usually front pressed).
Global
261

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents