Korg M50-88 Parameter Manual page 37

M50 series music workstation
Table of Contents

Advertisement

Br (Break)
This controls the depth and direction of the AMS
modulation for the Break level.
AMS2
This selects the second AMS source for controlling the EG's
Level parameters. The Start, Attack, Decay, and Break levels
share this source, but each has its own modulation intensity.
The parameters ofAMS2 are identical to those of AMS1,
above.
T (Time)
These settings let you use an AMS source to control the Time
parameters of the EG. The Attack, Decay, and Slope times
share this AMS source, but each has its own modulation
intensity.
Pitch EG Time Modulation
AMS=Velocity, Intensity = a positive (+) value
Note-on
Note-off
Note-on
"Attack"= +
"Attack"= +
"Decay"= +
"Decay"= +
"Slope"= +
"Slope"= +
Softly played note.
Strongly played note.
Times are longer.
Original Shape.
Reaches Sustain more
slowly.
AMS
AMS
This selects the AMS source to control the EG's Time
parameters. Velocity and Keyboard Track can both be useful
here, for instance.
For a list of AMS sources, please see "AMS (Alternate
Modulation Source) List" on page 374.
At (Attack)
This controls the depth and direction of the AMS
modulation for the Attack time.
For example, if you set the AMS source to Velocity and set
Attack to +99, the Attack time will get much longer at higher
velocities. If you instead set Attack to –99, the Attack time
will get much shorter at higher velocities.
When the AMS source is at its maximum value–for instance,
when Velocity is at 127–a setting of +8 will make the Attack
time almost twice as long, and a setting of –8 will cut the
Attack time almost in half.
Dc (Decay)
This controls the depth and direction of the AMS
modulation for the Decay time.
Sl (Slope)
This controls the depth and direction of the AMS
modulation for the Slope time.
[–99...+99]
Note-off
Note-on
Note-off
"Attack"= –
"Decay"= –
"Slope"= –
Strongly played note.
Times are shorter.
Reaches Sustain more
quickly.
[List of AMS Sources]
[–99...+99]
[–99...+99]
[–99...+99]
PROG P2: OSC/Pitch 2–8: Pitch EG
▼2–8: Menu Command
• 0: Write Program ☞p.73
• 1: Exclusive Solo ☞p.73
• 2: Copy Oscillator ☞p.74
• 3: Swap Oscillator ☞p.74
For more information, please see "Program: Menu
Command" on page 73.
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

M50-73M50-61

Table of Contents