Korg M50-88 Parameter Manual page 200

M50 series music workstation
Table of Contents

Advertisement

Sequencer mode
This dialog box is the same as in the menu command Copy
To Track.
3. In To Track, select the copy destination track.
In Measure, specify the beginning measure of the copy
destination.
Note: Track 1 of all sixteen preset template contains a drum
category program. (In preset template songs P02, P04, P08,
and P15 drum category programs are specified for multiple
tracks.)
The pattern names of the preset patterns indicate the
musical genre and part of the optimal drum category
program.
By loading the drum track for these preset template songs
and the corresponding preset patterns, you can efficiently
set up a drum track that is suited to each preset template
song.
When you execute, Measure will count up automatically.
You may then copy patterns as well. To exit the command,
press the Exit button.
For details on how to copy preset patterns to a song along
with the preset template song, please see "Using template
songs" on page 56 of the Owner's manual.
Save Template Song
(Save as User Template Song)
This command saves the program selections, track
parameters, and effect settings etc. of the current song as a
user template song U00–15. The settings you save here can
also be loaded in Song Play mode.
1. In To, specify the user template song (U00–15) in which
the data will be saved.
Be aware that when you execute this command, all settings
of the destination Template will be erased and rewritten
with the current settings.
Note: The Play Loop and RPPR settings are not saved. If you
want to save these settings and the user patterns, execute
Save SEQ in Media mode and save them to an SD card.
192
FF/REW Speed
This allows you to set the speed at which fast-forward or
rewind will occur when you press the FF switch or REW
switch.
1. In Speed, specify the speed (relative to the playback
tempo) at which fast-forward and rewind will occur.
The Speed setting is in multiples of the playback tempo. A
setting of 1 is the same speed as the playback tempo.
Settings of 2–4 respectively correspond to double, triple, or
quadruple speed of the playback tempo.
Note: Fast-forward and rewind speeds may be slower in
regions with dense performance data. Fast-forward and
rewind speeds will differ between regions where the
performance data is dense or sparse.
2. If Ignore Tempo is checked, the playback tempo and
note length will be ignored, and fast-forward and
rewind occurs.
If this item is unchecked, fast-forward and rewind will be
performed at the speed you specify for Speed.
Set Location
(Set Location for Locate Key)
When you press the LOCATE switch, you will move to the
location specified here.
1. In Location, specify the location to which you will
move when you press the LOCATE switch.
From the left, the values are Measure (001–999), Beat (01–16),
and Tick (000–479).
If you specify 001:01.000, you will move to the beginning of
the song when you press the LOCATE switch.
Note: When this dialog box is not open, you can hold down
the ENTER switch and press the LOCATE switch to set the
current location as the Set Location value.

Advertisement

Table of Contents
loading

This manual is also suitable for:

M50-73M50-61

Table of Contents