9-2: Mfx1; 9-3: Mfx2; 9-4: Tfx - Korg M50-88 Parameter Manual

M50 series music workstation
Table of Contents

Advertisement

9–2: MFX1
9–2a
Here, you can edit the parameters of the effect you selected
for MFX1 in the P9: MFX/TFX– Routing page.
9–2a: MFX1
MFX1 On/Off
This turns master effect 1 on/off. This is linked with the on/
off setting in the P9: MFX/TFX– Routing page.
Ch (Control Channel)
Specifies the MIDI channel that will control dynamic
modulation (Dmod) for the master effect.
Ch01...Ch16: The specified MIDI channel will be used for
control.
G ch: The global MIDI Channel (Global 1–1a) will be used
for control. Normally you will use the G ch setting.
P (Effect Preset)
[P00, P01...15, U00...15, ---------------]
With Effect Presets, you can easily store and recall all of the
settings for an individual effect. You can store up to 16 user
presets for each effect type, in addition to 15 re-writable
factory presets.
The same presets appear in all of the modes (Program,
Combination, Sequence, and Sampling).
Note that edits to effects parameters are automatically
stored with the Combination–you don't need to store them
as an Effect Preset. Presets just make it easier to re-use your
favorite settings.
For instance, you can save an Effect Preset while working on
a particular Combination, and then later use the same Effect
Preset in a different Program, Combination, or Song.
P00: Initial Set: These are the default settings that are
recalled when you select an effect type in the P9: MFX/TFX–
Routing page. You can't save your own settings here.
P01...P15: These contain preset data that Korg plans to
provide in the future. We recommend that you store your
settings in U00–U15.
U00...U15: These are areas in which you can store your own
settings.
---------------: This shows that no Effect Preset has been
selected. You'll see this if you've just selected an effect,
written a Combination, or selected a new Combination.
Selecting this setting from the menu will not have any effect.
Note: Combinations save the effects parameter settings, but
they don't save the number of the selected Effect Preset. If
you select an Effect Preset, and then save the Combination,
the Effect Preset setting will revert to "--------------."
For more details, please see "Using Effect Presets" on
page 67.
COMBI P9: MFX/TFX (Master/Total Effect) 9–2: MFX1
MFX1 Parameters
Here, you can set the effect parameters of the insert effect
you chose in the P9: MFX/TFX– Routing page.
9–2
For details on the master effects, please see the "Effect
Menu
Guide" on page 271.
▼9–2: Menu Command
• 0: Write Combination ☞p.120
• 1: Exclusive Solo ☞p.73
• 2: Copy MFX/TFX ☞p.76
• 3: Swap MFX/TFX ☞p.77
• 4: Write FX Preset ☞p.123
For more information, please see "Combination: Menu
Command" on page 120.
9–3: MFX2,
9–4: TFX
[Off, On]
These pages let you edit the parameters of Master Effect 2
and the Total Effect. To select different effects types, use the
[Ch01...16, G ch]
P9: MFX/TFX– Routing page.
The parameters for MFX2, TFX is the same as for MFX1. For
more information, please see "9–2: MFX1," above.
119

Advertisement

Table of Contents
loading

This manual is also suitable for:

M50-73M50-61

Table of Contents