8-3: Ifx1 - Korg M50-88 Parameter Manual

M50 series music workstation
Table of Contents

Advertisement

• 1: Exclusive Solo ☞p.73
• 2: Copy Insert Effect ☞p.76
• 3: Swap Insert Effect ☞p.76
For more information, please see "Program: Menu
Command" on page 73.
PROG P8: IFX (Insert Effect) 8–3: IFX1
8–3: IFX1
8–3a
8–3a: Insert Effect 1 (IFX1)
Here you can edit the parameters of the insert effect you
selected in the P8: IFX– Insert FX Setup page.
Effect dynamic modulation (Dmod) is controlled on the
global MIDI Channel (Global 1–1a). For more
information, please see "Dynamic Modulation Source
List" on page 380.
IFX1 On/Off
This turns the insert effect on and off. It is linked with the
on/off setting in the Insert FX Setup page.
P (Effect Preset)
[P00, P01...15, U00...15, ---------------]
Effect Presets let you easily store and recall all of the settings
for an individual effect. You can store up to 16 user presets
for each effect type, in addition to 15 re-writable factory
presets.
The same presets appear in all of the modes (Program,
Combination, and Sequencer).
Note that edits to effects parameters are automatically
stored with the Program–you don't need to store them as an
Effect Preset. Presets just make it easier to re-use your
favorite settings.
For instance, you can save an Effect Preset while working on
a particular Program, and then later use the same Effect
Preset in a different Program, Combination, or Song.
P00: Initial Set: These are the default settings that are
recalled when you select an effect type in the Insert FX Setup
page. You can't save your own settings here.
P01...P15: These contain preset data that Korg plans to
provide in the future. We recommend that you store your
settings in U00–U15.
U00...U15: These are areas in which you can store your own
settings.
---------------: This shows that no Effect Preset has been
selected. You'll see this if you've just selected an effect,
written a Program, or selected a new Program. Selecting this
setting from the menu will not have any effect.
Note: Programs save the effects parameter settings, but they
don't save the number of the selected Effect Preset. If you
select an Effect Preset, and then save the Program, the Effect
Preset setting will revert to "--------------."
Using Effect Presets
1. Select an effect in the Insert FX Setup page.
2. The P00: Initial Set settings will be recalled.
"P (Effect Preset)" will indicate --------.
8–3
Menu
[Off, On]
67

Advertisement

Table of Contents
loading

This manual is also suitable for:

M50-73M50-61

Table of Contents