3-3: Osc T01-08, 3-4: Osc T09-16 - Korg M50-88 Parameter Manual

Combination mode
3–3: OSC T01–08,
3–4: OSC T09–16
3–3a
3–3b
3–3c
These settings specify how timbres 1–8 and 9–16 will be
played.
3–3(4)a: Combination Name, Tempo
3–3(4)b: Timbre Info
For more information, please see "2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16" on page 93.
3–3(4)c: OSC
Timbre 01 (Timbre Number):
Force OSC Mode
This lets you override the Program's stored Voice Assign
Mode settings, if desired.
PRG: The Program's stored Prog P1: Basic/Ctrls– Program
Basic Voice Assign Mode settings will be used.
Poly: The timbre will play polyphonically, regardless of the
Program's settings.
MN (Mono): The timbre will play monophonically,
regardless of the Program's settings.
LGT (Legato): The timbre will sound monophonically, and
will play legato according to the Program's Mode setting
(Prog 1–1b).
With the MN or LGT settings, the Program's Priority setting
(Prog 1–1b) will determine the priority of the note that
sounds when you play two or more notes.
OSC Select
Specifies whether the timbre's program will play OSC1,
OSC2, or both.
For programs whose Oscillator Mode (Prog 1–1a) is Double,
this setting lets you specify that only OSC1 or OSC2 will
sound.
BTH (Both): OSC1 and 2 will sound as specified by the
settings of the program.
OS1: Only OSC1 will sound.
OS2: Only OSC2 will sound. Programs will not sound if
Oscillator Mode is set to Single or Drums.
Portamento
Make portamento settings for each timbre.
PRG: Portamento will be applied as specified by the
program settings.
Off: Portamento will be off, even if the original program
settings specified Portamento to be on.
96
3–3
Menu
[PRG, Poly, MN, LGT]
[BTH, OS1, OS2]
[PRG, Off, 001...127]
001...127: Portamento will be applied with the portamento
time you specify here, even if it is turned off by the program
settings.
If the Status (Combi 3–1(2)c) is set to INT, CC#05
(portamento time) and CC#65 (portamento switch)
messages will be received and will control and change
these settings. (If the setting is PRG, CC#05, portamento
time will not be received.) These messages will be
received on the MIDI channel specified for each timbre
by MIDI Channel (Combi 3–1(2)c).
Timbre 02...08, 09...16 (Timbre Number):
Here you can make voice assignment settings for timbres 2–
8 and 9–16. The settings are the same as for timbre 1. For
more information, please see "Timbre 01 (Timbre
Number):," above.
▼3–3(4): Menu Command
• 0: Write Combination ☞p.120
• 1: Exclusive Solo ☞p.73
• 2: Copy from Program ☞p.120
For more information, please see "Combination: Menu
Command" on page 120.