0-5: Arpeggiator A, 0-6: Arpeggiator B - Korg M50-88 Parameter Manual

M50 series music workstation
Table of Contents

Advertisement

Combination mode
0–5: ARPEGGIATOR A,
0–6: ARPEGGIATOR B
0–5a
0–5b
0–5c
Here, you can make arpeggiator settings for the
combination. A combination can run two arpeggiators
simultaneously.
Arpeggiator parameters can be edited in P7: ARP/DT, but
certain major parameters can be edited in these pages as
well. You can edit these parameters in realtime, for example,
by changing the arpeggio pattern while playing in Combi
P0: Play.
You can also use the TEMPO knob and the control surface
arpeggio control (ARP) GATE knob, VELOCITY knob,
LENGTH knob, and OCTAVE knob to control the
arpeggiator in realtime.
To save the edits you make, use Write Combination.
0–5(6)a: Combination Select, Tempo
Bank, Combination Number & Name
These are the bank, number, and name of the current
Combination. Here, you can also select a combination.
For more information, please see "0–1(2)a: Combination
Select" on page 80.
(Tempo)
For more information, please see " (Tempo)" on page 81.
0–5(6)b: Arpeggiator Run A/B,
Timbre assign
Arpeggiator Run A, B
When the ARP ON/OFF switch is on, the arpeggiator(s) you
checked here will run if they are assigned to a timbre by
Arpeggiator Assign (7–1(2)c).
When the arpeggiator is on, these check boxes let you turn A
and B on/off.
This parameter can also be set from P7: Arpeggiator/Drum
Track page Arpeggiator Run A, B.
Timbre assign
This indicates the arpeggiator A and B assignment status for
each timbre 1–8. These settings are made in Arpeggiator
Assign (7–1(2)c).
84
0–5
Menu
[040.00...300.00, EXT]
0–5(6)c: Arpeggiator A (B)
Pat (Pattern)
[P0...P4, U0000(INT)...U0899(INT),
U0900(USER)...U1027(USER)]
Octave
Reso (Resolution)
Sort
Latch
Key Sync.
Keyboard
Set the various parameters of the combination arpeggiator.
For more information, please see "COMBI P7: Arpeggiator/
Drum Track" on page 107.
These parameters can also be set from 7–3(4): Arpeggiator
A(B) Setup.
▼0–5(6): Menu Command
• 0: Write Combination ☞p.120
• 1: Exclusive Solo ☞p.73
• 2: Copy from Program ☞p.120
• 3: Copy Arpeggiator ☞p.122
For more information, please see "Combination: Menu
Command" on page 120.
[1, 2, 3, 4]
[
,
,
,
,
, ]
[Off, On]
[Off, On]
[Off, On]
[Off, On]

Advertisement

Table of Contents
loading

This manual is also suitable for:

M50-73M50-61

Table of Contents