Combi P5-2: Midi Filter 2; 5-2-1: -5 T01-08, 5-2-2: -5 T09-16; 5-2-3: -6 T01-08, 5-2-4: -6 T09-16 - Korg M50-88 Parameter Manual

M50 series music workstation
Table of Contents

Advertisement

Combination mode
COMBI P5–2: MIDI Filter 2
5–2–1: –5 T01–08,
5–2–2: –5 T09–16
5–2
–1a
5–2
–1b
5–2
–1c
5–2–1(2)a: Combination Name, Tempo
5–2–1(2)b: Timbre Info
For more information, please see "2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16" on page 93.
5–2–1(2)c: MIDI Filter5
Timbre 01 (Timbre Number):
Enable SW1
Enable SW2
Specifies whether or not the effect of the SW1 and SW2
switches will be transmitted and received.
SW1 and SW2 are controlled by the SW1 and SW2 switches.
The function of these switches is specified in the P1:
Controllers– Controllers Setup page.
These settings are valid if these keys are assigned to SW1
Mod. (CC#80), SW2 Mod. (CC#81), or Portamento SW
(CC#65).
Enable Foot Switch
Specifies whether or not the effect of the ASSIGNABLE
SWITCH will be transmitted and received. The function is
assigned in Global P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Foot Pedal
Specifies whether or not the effect of the ASSIGNABLE
PEDAL will be transmitted and received. The function is
assigned in Global P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter5 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see "Timbre 01 (Timbre Number):," above.
106
▼5–2–1(2): Menu Command
• 0: Write Combination ☞p.120
• 1: Exclusive Solo ☞p.120
• 2: Copy from Program ☞p.120
5–2
–1
For more information, please see "Combination: Menu
Menu
Command" on page 120.
5–2–3: –6 T01–08,
5–2–4: –6 T09–16
5–2
–3a
5–2
–3b
5–2
–3c
5–2–3(4)a: Combination Name, Tempo
[Off, On]
5–2–3(4)b: Timbre Info
[Off, On]
For more information, please see "2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16" on page 93.
5–2–3(4)c: MIDI Filter6
Timbre 01 (Timbre Number):
Enable Other Control Change Messages [Off, On]
Specifies whether or not MIDI control messages not covered
[Off, On]
in the preceding items MIDI Filter will be transmitted and
received.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter6 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see "Timbre 01 (Timbre Number):," above.
[Off, On]
▼5–2–3(4): Menu Command
• 0: Write Combination ☞p.120
• 1: Exclusive Solo ☞p.120
• 2: Copy from Program ☞p.120
For more information, please see "Combination: Menu
Command" on page 120.
5–2
–3
Menu

Advertisement

Table of Contents
loading

This manual is also suitable for:

M50-73M50-61

Table of Contents