▼5–3: Menu Command
• 0: Write Drum Kits ☞p.255
• 1: Rename Drum Kit ☞p.255
• 2: Copy Drum Kit ☞p.255
• 3: Copy Key Setup ☞p.255
• 4: Swap Key Setup ☞p.255
For more information, please see "Global: Menu Command"
on page 251.
Global P5: Drum Kit 5–4: Voice/Mixer
Specify the voice assign, pan, and effect routing etc. for each
key of the drum kit.
5–4a: Voice Assign Mode
On (checked): Even when the same key (note) is played
repeatedly, the previous note will be halted before the new
note is begun, so that the notes will not overlap. Normally
you will leave this unchecked.
Exclusive Group (Exclusive Assign)[Off, 001...127]
001–127: This allows you to assign keys to any of 127
groups. Keys assigned to the same group will be treated as a
single group, and will be played monophonically with last-
note priority. For example you might assign closed and open
hi-hat sounds to the same group so that two or more hi-hat
sounds can not sound simultaneously.
Off: Keys will not be grouped. This is the default setting.
Enable Note On Receive
On (checked): Note-on messages will be received. Normally
you will check this, but you can uncheck it if you do not
want speciﬁc notes to sound.
Enable Note Off Receive
On (checked): Note-off messages will be received. Normally
you will uncheck this. This parameter is valid when Hold
(Prog 1–2a) is checked (Hold On). In the case of a drum
program, you will normally select Hold On. In this case if
Enable Note Off Receive is checked, note-off messages will
be received, and the sound will stop (the release segment of
the EG will begin) when the key is released.