KORG M50-88 Parameter Manual: Combi P5: Midi Filter; Combi P5–1: Midi Filter 1; T01–08, 5–1–2: –1 T09–16

M50 music workstation.
Hide thumbs
   
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419

COMBI P5: MIDI Filter

These settings allow you to apply filters to the MIDI data
that will be transmitted and received by each timbre 1–16.
For example even if two timbres are being played by the
same MIDI channel, you can make settings so that the
damper pedal will apply to one but not the other.
On (checked): Transmission and reception or reception
(After Touch) of MIDI data is enabled.
If Status (Combi 3–1(2)c) is INT, the effects of the checked
items will be applied to the timbre's program when the
controllers of the M50 are operated or when MIDI data is
received. (Effect Dynamic Modulation is not affected by
these settings.)
In the case of EXT or EX2, operating a controller on the M50
will transmit MIDI data on the channel of that timbre. MIDI
COMBI P5–1: MIDI Filter 1
5–1–1: –1 T01–08,
5–1–2: –1 T09–16
5–1
–1a
5–1
–1b
5–1
–1c
5–1–1(2)a: Combination Name, Tempo
5–1–1(2)b: Timbre Info
For more information, please see "2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16" on page 93.
5–1–1(2)c: MIDI Filter1
Timbre 01 (Timbre Number):
Enable Program Change
Specifies whether or not MIDI program change messages
will be transmitted and received.
Enable After Touch
Specifies whether or not MIDI after touch messages will be
received.
Enable Damper
Specifies whether or not MIDI CC#64 hold (damper pedal)
messages will be transmitted and received.
Enable Portamento SW
Specifies whether or not MIDI CC#65 portamento on/off
messages will be transmitted and received.
COMBI P5: MIDI Filter 5–1–1: –1 T01–08, 5–1–2: –1 T09–16
transmission/reception settings for the entire M50 can be
made in MIDI Filter (Global 1–2b).
The MIDI Filter pages 1–4 and 2–5 contain MIDI filters for
assignable controllers (whose function can be set by the
user), and if these are assigned to MIDI control changes, the
filter settings will affect those control changes. In this case, if
the same control change has been assigned in MIDI Filter
pages 1–3, the settings in MIDI Filter pages 1–1 through 1–3
will take priority. Also, if the same control change is
assigned to two or more controllers in the MIDI Filter pages
1–4 and 2–5, checking any one of them will enable that
control change.
Off (unchecked): Transmission and reception of MIDI data
is disabled.
Note: MIDI CC# = MIDI control change message numbers.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter1 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see "Timbre 01 (Timbre Number):," above.
5–1
▼5–1–1(2): Menu Command
–1
Menu
• 0: Write Combination ☞p.120
• 1: Exclusive Solo ☞p.73
• 2: Copy from Program ☞p.120
For more information, please see "Combination: Menu
Command" on page 120.
[Off, On]
[Off, On]
[Off, On]
[Off, On]
103

Advertising

   Related Manuals for KORG M50-88

This manual also for:

M50-73, M50-61

Comments to this Manuals

Symbols: 0
Latest comments: