Controlling pan for each key
To use separate pan settings for each key:
1. Access the Prog P4: Amp/EQ– Amp1/Driver1 page.
2. Under Pan, make sure that the Use DKit Setting check-
box is checked.
When Use DKit Setting is on, the Program will use the pan
settings for each key of the Drum Kit.
3. Access the Global P5: Drum Kit– Voice/Mixer page.
4. Use "Pan" to specify the panning for each key.
Saving Drum Kits
Once you've spent all this time editing, you'll want to save
The contents of your editing in Global mode are
preserved as long as the power is on, but will be lost
when you turn off the power. If you want to keep your
edits, you must execute Write Drum Kits (or "Update
This will save all drum kits.