Mixer - Korg M50-88 Parameter Manual

M50 series music workstation
Table of Contents

Advertisement

DrumKit IFX Patch dialog
Use the DrumKit IFX Patch menu command if you want the
drum program to use effects other than timbres 2 and 3.
Choose DrumKit IFX Patch from the page menu, and
temporarily send the drum kit IFX1 to IFX3, IFX2 to IFX4,
and IFX3 to IFX5. Executing with these settings will
temporarily change the effects to which the drum kit is
being sent (see the following diagram).
Insert Effect = Stereo In – Stereo Out
OSC1
OSC2
OSC1: Amp1 Pan = L001
Left
Center
Right
OSC2: Amp2 Pan = R127
Post IFX Pan: CC#8
C064
L032
L001
R096
R127
Left
Center
Right

Mixer

In Program, Combination, and Sequencer modes, the P8–
Insert FX Setup page lets you set the Pan: CC#8 (post-IFX
panning), Bus (Bus Select), Ctrl Bus (FX control bus), and
the Send1 and Send2 levels to the master effects.
If you have checked the Chain to connect the Insert Effects
in series, these parameters Pan: CC#8 – Send2 for the post-
IFX (last Insert Effect in the chain) signal become effective.
Pan: CC#8
This parameter enables you to set the pan of the post-IFX
signal.
If you are using the stereo-in/stereo-out Insert Effects, set
this parameter to "C064" to enable the Pan settings for the
oscillators (Prog 4–1c, 4–5), timbres (Combi 0–3(4)b), tracks
(Seq 0–1–3(4)b).
If you are using mono-in/stereo–out or mono-in/mono–out
Insert Effects, the Pan settings for the oscillators, timbres,
and tracks are ignored, and they are set to Center. Use the
Pan: CC#8 parameter (Prog 8–2a, Combi/Seq 8–1–3b) to set
the pan. "L000" is hard left, and "R127" is hard right.
• For more about effect types such as stereo-in/stereo-out,
see "In/Out" on page 276.
You can control these parameters via CC#8.
OSC1: Amp1 Pan = L032
Left
Center
Right
OSC2: Amp2 Pan = R096
Post IFX Pan: CC#8
C064
L032
L001
R096
R127
Left
Center
Right
Insert Effects (IFX1–IFX5) Mixer
Insert Effect = Mono In - Stereo Out
Mono In - Mono Out
OSC1
OSC2
OSC1: Amp1 Pan = L001
Left
Center
Right
OSC2: Amp2 Pan = R127
Post IFX Pan: CC#8
C064
L032
L001
R096
R127
Left
Center
Right
279

Advertisement

Table of Contents
loading

This manual is also suitable for:

M50-73M50-61

Table of Contents