External Setups; 1-4: External Mode 2 - Korg M50-88 Parameter Manual

M50 series music workstation
Table of Contents

Advertisement

Global mode

External setups

The content that you edit in Global mode is preserved
until you turn off the power, but will be lost when the
power is turned off. To save your settings, execute
Write Global Setting (or Update Global setting).
1. Press the MODE GLOBAL switch to enter Global
mode.
2. Access the Global P1: MIDI– External Mode 1 page.
3. Use "Setup (Setup Select)" to select the external setup
that you want to edit.
4. In the External Mode 1 page you can make settings for
knobs 1–8.
MIDI Channel specifies the MIDI channel on which each
knob will transmit.
CC# specifies the MIDI control change that each knob will
transmit.
5. Access the Global P1: MIDI– External Mode 2 page.
Here, you can make settings for chord trigger switches
1–4.
MIDI Channel specifies the MIDI channel on which each
switch will transmit.
Note/CC# specifies the note or MIDI control change that
each switch will transmit.
Fixed Velocity specifies the velocity of the notes that will be
transmitted.
Assigning a name
It's a good idea to name any external setups that you create
so that you can remember its purpose.
Use the Rename External Setup utility to assign a name. For
more details, please see "Editing names" on page 91 of the
Owner's manual.
226
1–4: External Mode 2
1–4a
1–4b
When control surface EXTERNAL is selected, the chord
trigger switches will transmit the note on/off messages or
control change messages on the specified channel. For more
information, please see "0–8d: External" on page 14.
1–4a: External Setup
Setup (External Setup)
This selects the External Setup to edit.
You can assign a name to each setup. For more information,
please see "Rename External Setup" on page 254.
1–4b: Chord Trigger Switches
MIDI Channel
This sets the MIDI Channel for the chord trigger switch.
Each switch can send on a different channel, if desired.
Gch means that the pad will transmit on the Global MIDI
Channel, as set in Global mode. This allows you to re-direct
any number of knobs and chord trigger switches to a
different channel at once, without editing the individual
controls.
Note/CC#
[Off, C–1...G9, CC#000...119]
Each chord trigger switch can send either a MIDI note or a
MIDI CC message. When assigned to a CC, the switch sends
a value of 127 when it is pressed down, and a value of 0
when it is released.
Fixed Velocity
This specifies the velocity for each chord trigger switch. The
velocity is fixed at the value you specify here.
When you press the switch, the note will be transmitted
with this velocity value on the MIDI channel specified by
MIDI Channel.
1–4
Menu
[000...127]
[Ch01...16, Gch]
[001...127]

Advertisement

Table of Contents
loading

This manual is also suitable for:

M50-73M50-61

Table of Contents