0-1-7: Tone Adjust - Korg M50-88 Parameter Manual

M50 series music workstation
Table of Contents

Advertisement

Example)
When "Play Intro" is checked
Track 1 will loop as follows.
M001 – M002 – M003 – M004 – M003 – M004 –M003 –
M004...
When "Play Intro" is not checked
Track 1 will loop as follows.
M003 – M004 – M003 – M004 – M003 – M004 – M003 –
M004...
In this way, you can use Track Play Loop to make the
realtime recording process more efficient.
Track 02...08, 09...16 (Track Number):
For more information, please see "Track 01 (Track
Number):," above.
▼0–1–5(6): Menu Command
• 0: Memory Status ☞p.191
• 1: Exclusive Solo ☞p.73
• 2: Rename Song ☞p.191
• 3: Delete Song ☞p.191
• 4: Copy From Song ☞p.191
• 5: Load Template Song ☞p.191
• 6: Save Template Song (Save as User Template
Song) ☞p.192
• 7: FF/REW Speed ☞p.192
• 8: Set Location (Set Location for Locate Key) ☞p.192
• 9: GM Initialize ☞p.193
• 10: Copy From Combi (Copy from
Combination) ☞p.194
• 11: Copy from Program ☞p.195
For more information, please see "Sequencer: Menu
Command" on page 191.
SEQ P0–1: Play/REC 0–1–7: Tone Adjust
0–1–7: Tone Adjust
0–1
–7a
0–1
–7b
0–1
–7c
Tone Adjust provides two important features:
• The Tone Adjust parameter lets you edit the principal
Program parameters.
• It lets you modify Programs, including everything from
subtle tweaks (like changing LFO speeds) to dramatic
changes (such as selecting a different Multisample). Any
changes that you make are stored with the Song, and do
not alter the original Program.
Each of the sixteen tracks has its own set of tone adjust
parameters.
For more information, see:
• "Absolute (Abs), Relative (Rel), Meta parameter" on
page 6
• "Tone Adjust and MIDI SysEx" on page 7
• "Interaction between Tone Adjust and MIDI CCs" on
page 7
Saving Tone Adjust Edits
In Program mode, when you make edits via Tone Adjust
and then save the results, the Program data is changed–just
as if you'd edited the internal parameters directly. For more
information, please see "Saving Tone Adjust Edits" on
page 7.
In Sequencer mode, however, all Tone Adjust edits are
stored within the Song; the Program itself is not changed.
This lets you alter the way that a Program sounds in one
specific Song without affecting the way that it sounds in
Program mode, or in any other Combis or Songs.
0–1–7a: Track Select, Tempo, RPPR
For more information, please see "0–1–1: Program T01–08,
0–1–2: Program T09–16" on page 129.
0–1–7b: Track Select, Selected parameter
information
Track select
Track
This selects the track whose Tone Adjust parameters you
wish to adjust. You can switch back and forth between the
different tracks as much as you like, without losing your
edits.
Auto Load (Auto Load PRG)
When you first load a Program into a track, this parameter
determines whether or not the Program's Tone Adjust
settings will be loaded as well.
0–1
–7
Menu
[1...16]
[Off, On]
135

Advertisement

Table of Contents
loading

This manual is also suitable for:

M50-73M50-61

Table of Contents