Korg M50-88 Parameter Manual page 213

If you set Track Select to Track 02, you'll be able to monitor
it.
2. In P8–1: IFX– Routing T01–08, send MIDI track 2 to
IFX3.
3. Specify the effect that you want to use from measure 1.
In P8–1: IFX– Insert FX Setup, select 035: Stereo Phaser for
IFX3. Press the On/Off button to turn on the IFX3.
In P8–1: IFX– IFX3, set the parameters as desired.
4. Make sure that you've selected Track 02 in Track Select,
and record as desired.
5. In the P8–1: IFX page, select the menu command Put
Effect Setting to Track to access the dialog box.
6. Specify the location at which the exclusive message for
the effect will be inserted.
Effect: IFX3
To: Song: 000
Track: 03
Measure: 001
Beat.Tick: 01.000
7. Press the OK button.
8. Specify the effect that you want to use for measure 9
and following.
Go to the P8–1: IFX– Insert FX setup, and choose 032: Stereo
Flanger for IFX3.
In the P8–1: IFX– IFX3, set the parameters as desired.
9. In the P8–1: IFX, choose the Put Effect Setting to Track
menu command to open the dialog box.
10. Specify the location at which the exclusive message for
the effect will be inserted.
Effect: IFX3
To: Song: 000
Track: 03
Measure: 009
Beat.Tick: 01.000
11. Press the OK button.
12. When you play back after executing these commands,
the effect on track 3 will change to 032: Stereo Flanger
at measure 9.
13. If you press the COMPARE switch (it will light) and
play back, the playback will occur as it did before you
executed Put Effect Setting to Track.
14. In the P6: Track Edit– Track Edit page, set Track Select
to Track 03, and choose the Event Edit menu command
to access the event edit screen. (In the Set Event Filters
dialog box, check Exclusive.)
Notice that a MIDI parameter change System Exclusive
message is inserted at the beginning and at measure 9 of
track 3.
Sequencer: Menu Command Put Effect Setting to Track
2) Using the song's own effect settings from the beginning
of the song, and inserting effect settings from elsewhere
into the middle of the song
In this example, we'll apply an insert effect (IFX3) to MIDI
track 3, and set our parameters so that it uses 035: Stereo
Phaser from the beginning of the song. At measure 9, we'll
insert a MIDI parameter change System Exclusive message
to make IFX3 switch to the 032: Stereo Flanger effect settings
that were created for a different song.
1. Select a desired program for MIDI track 3, and send it
to IFX3.
Make the following settings for MIDI track 3.
Track Select: Track 03 (P0)
Bus (IFX/Output) Select: IFX3 (P8)
In the P0–1: Play/REC– Program T01–08 page, assign a
program to track 3. Then use the P8: Insert Effect page to
route track 3 to the effect, and make effect settings.
2. Make sure that you've selected Track 03 in Track Select,
and record on it.
3. On a separate song you copied, make the effect settings
that you want start using at measure 9.
1) Create song S001.
2) Use the Copy From Song menu command to copy from
S000.
In song 001, make the effect settings that you want to use
from measure 9. Go to the P8–1: IFX– Insert FX Setup, and
choose 032: Stereo Flanger for IFX3.
In the P8–1: IFX– IFX3, set the parameters as desired.
4. Select "Put Effect Setting to Track" to open the dialog
box.
5. Insert the effect settings you created in song 001 into
song 000.
Effect: IFX3
To: Song: 000
Track: 03
Measure: 009
Beat.Tick: 01.000
6. Press the OK button to execute the command.
7. After execution, select song 000 and play it back. The
effect for track 3 will change to 032: Stereo Flanger at
measure 9.
8. In song 000, you can press the COMPARE switch (it
will light) and play back to hear the song as it was
before you executed Put Effect Setting to Track.
You can use the COMPARE switch to compare the state of
the track before and after execution.
Note: In the P6: Track Edit– Track Edit page of song 000, set
Track Select to Track 03 and choose the Event Edit menu
command to access the Event Edit screen. (In the Set Event
Filters dialog box, check Exclusive.)
Notice that a MIDI parameter change System Exclusive
message is inserted at measure 9 of track 3.
205