Copy Arpeggio Pattern
This command copies the settings of another user arpeggio
pattern to the currently selected arpeggio pattern.
It is not possible to copy from a preset arpeggio pattern P0–
Select the copy source arpeggio pattern "From."
Be aware that when you execute Copy Arpeggio
Pattern, all settings of the currently selected arpeggio
pattern will be overwritten.
This command initializes the step parameters (Tone, Pitch
Offset, Gate, Velocity, Flam) of the arpeggio pattern.
Empty will initialize all tones to a blank state.
Full will initialize all tones to a full state.
This command copies the settings of a speciﬁc step. The
settings of two or more adjacent steps can also be copied
1. In "From Step," select the range of steps that you wish
2. In "To Step," select the copy destination step.
If you selected more than one step in "From Step," the steps
will be copied starting at "To Step" and continuing through
the steps to the right.
This command deletes the step parameters (Tone, Pitch
Offset, Gate, Velocity, Flam) of the currently selected step
number. Subsequent steps will move one column toward the
This command inserts an empty step into the currently
selected step number. Subsequent steps will be moved one
step to the right.
This command rotates the step settings.
Select the Direction of rotation.
For example, suppose there is a pattern of Length 4.
If you select Forward, the settings of Step 1 will be rewritten
to 2, Step 2 →3, Step 3 →4, Step 4 → 1.
If you select Backward, the settings of Step 1 will be
rewritten to 4, Step 2 → 1, Step 3 → 2, Step 4 → 3.