SEQ P4: Zones/Delay 4–3: Vel Z T01–08, 4–4: Vel Z T09–16 (Velocity Zones T01–08, T09–16)
Top Key and Bottom Key settings can also be input by
holding down the ENTER switch and playing a note on the
It is not possible to set the bottom key above the top key
of the same track. Nor is it possible for the top and
bottom slopes to overlap.
Track 02...08, 09...16 (Track Number):
These are the key zone settings for MIDI tracks 2–8 and 9–
16. They are the same as for track 1. For more information,
please see "Track 01 (Track Number):," above.
▼4–1(2): Menu Command
• 0: Memory Status ☞p.191
• 1: Exclusive Solo ☞p.73
• 2: Rename Song ☞p.191
• 3: Delete Song ☞p.191
• 4: Copy From Song ☞p.191
• 5: Load Template Song ☞p.191
• 6: Save Template Song (Save as User Template
• 7: FF/REW Speed ☞p.192
• 8: Set Location (Set Location for Locate Key) ☞p.192
• 9: GM Initialize ☞p.193
• 10: Copy From Combi (Copy from
• 11: Copy from Program ☞p.195
For more information, please see "Sequencer: Menu
Command" on page 191.
4–3: Vel Z T01–08,
4–4: Vel Z T09–16
(Velocity Zones T01–08, T09–16)
Here, you can set the Top/Bottom Velocity parameters to
specify the range of velocities that will be sounded by MIDI
tracks 1–8 and 9–16, and Top/Bottom Slope specify the
range over which the volume will be adjusted.
For more information, please see "4–3: Vel Z T01–08, 4–4: Vel
Z T09–16 (Velocity Zones T01–08, T09–16)" on page 100.
These settings do not affect MIDI transmission/
reception. All note data that is received will be recorded
into the internal sequencer, and all note data from the
internal sequencer or from the keyboard will be
It is not possible to set the bottom velocity greater than
the top velocity for the same track. Nor can the top
slope and the bottom slope overlap.
4–3(4)a: Zone Map
This area indicates the note and velocity ranges in which
each MIDI track will sound.
For more information, please see "4–1(2)a: Zone Map" on
4–3(4)b: Track Select, Tempo, RPPR
4–3(4)c: Track Info
For more information, please see "2–1: Trim T01–08, 2–2:
Trim T09–16" on page 149.
4–3(4)d: Velocity Zones
Track 01 (Track Number):
Speciﬁes the maximum velocity value that will sound each
Speciﬁes the number of velocity steps over which the
original volume will be reached, starting from the Top
0: The volume will be at the original value from the top
120: The volume will decrease as the velocity approaches the