Program P7: Edit-Arpeggiator; Program P8: Edit-Insert Effect; Program P9: Edit-Master Effect - Korg EXB-MOSS Manual

AMS2 (Alternate Modulation Source 2)
Selects a modulation source 2 ( p.48 of this manual)
that will control the EG1 times.
At (Attack Time AMS2 Intensity)
Dc (Decay Time AMS2 Intensity)
Sl (Slope Time AMS2 Intensity)
Rl (Release Time AMS2 Intensity)
Specifies the depth and direction of the effect that
"AMS2" will have on each EG time.
EG changes (time) (AMS2=Velocity, Intensity=+value)
Note-on Note-on
Note-off
When keyboard is
When keyboard is
played softly with At,
played strongly with At,
Dc, Sl, and Rl set to "+" Dc, Sl, and Rl set to "+"
(The settings of 6-1d:
AMS2)
6–2: EG 2
6–3: EG 3
6–4: EG 4
EG 2, EG 3 and EG 4 have the same parameters as EG
1. Refer to "6–1: EG 1."
46
[Off...MIDI:CC#83]
[–99...+99]
[–99...+99]
[–99...+99]
[–99...+99]
Note-on
Note-off Note-off
When keyboard is
played strongly with At,
Dc, Sl, and Rl set to "-"

Program P7: Edit-Arpeggiator

Here you can make arpeggiator-related settings.
For details on the parameters etc., refer to TRITON
Parameter Guide p.22, "Program P7."

Program P8: Edit-Insert Effect

Here, you can make settings for the insertion effects.
For details on the parameters etc., refer to TRITON
Parameter Guide p.24, "Program P8."

Program P9: Edit-Master Effect

Here, you can make settings for the master effects.
For details on the parameters etc., refer to TRITON
Parameter Guide p.27 "Program Edit P9."