Clearing Paper Jams; If An Original Document Jams - imagistics 5000 Operating Manual

Clearing paper jams

If an original document jams

1
If an original document jams in the
memory for faxing or copying, the
Document Jam Document Jam
Open & Check Open & Check
the Blinking Cover the Blinking Cover
2
Open the scanner cover and remove the jammed paper (see next column).
The will show:
LCD
Document Jam Document Jam
Continue Storing? Continue Storing?
[ [ Yes Yes ] [ ] [ No No
If you do wish to resume the operation, press [Yes] and proceed to step 3.
To abort the operation, press [No]. This will erase all pages stored during this
operation, and the machine will ask you to remove the jammed paper.
Important: If more than 60 seconds passes without pressing any key, the
machine will erase all pages stored during this operation and
the machine will ask you to remove the jammed paper.
Note: If the document jams in one of the following cases, the machine will
always abort the operation. You need to restart the job from the begin-
ning.
• The first page of a document jammed
• Any jam during a quick memory transmission
Also, a "Repeat transmission, error on scan at page xx" message will
be printed if the document jammed during transmission.
while scanning the document into the
ADF
will show:
LCD
] ]
3
The will show which page is jammed. Reset the unscanned document(s)
LCD
including the previously jammed page , and press
Storing has not been Completed Storing has not been Completed
Reset Document from the Reset Document from the
Following Page and Press START Following Page and Press START
Page No. 2 Page No. 2
Note: If more than 60 seconds has elapsed without pressing a key, the
machine will begin to send or copy the document(s) stored during this
operation.
If you wish to cancel this operation, press
pages from memory and then return to standby mode.
To remove the document:
1
Open the scanner cover.
If you can remove the document,
remove it and skip to step 3.
If not, proceed to step2.
2
Lift the inner cover and remove the
document from the machine.
3
Gently close the scanner cover, making
sure both sides are snapped down
securely.
Note: If the original document has
become wrinkled or torn, do not
re-scan it, as it may cause
another jam.
Just in case ...
to continue scanning.
START
. The machine will delete all
STOP
scanner cover release
5.1