imagistics 5000 Operating Manual page 125

Just in case ...
What you see on the
LCD
Document Full
Document Jam
Document Stored
Hang Up Phone
In Relay Box
In Secure Box
Invalid I.D. Code
Invalid Number
Invalid Protect Passcode
5.6
What it means/What to do
You tried to enter an document into an F-Code
box or a Batch box, but the machine has reached
its capacity. Delete documents stored in box until
the machine will let you proceed.
An original document jammed while you are
using
the ADF for either faxing or copying. See page
5.1 for instructions on clearing the jam.
You tried to erase a batch box which contains at
least one document. Erase the document(s), then
try again.
. . . or . . .
A received document was in your machine's
memory when you tried to turn off the security
reception passcode. Print the received document
from your fax's memory, then retry the desired
operation.
The optional handset is off-hook.
Hang it up, making sure the upper part of the
handset presses down on the "hook" button.
You tried to store a document for polling in an
F-Code box which is set to be a relay box.
Select an F-Code box which is set to be a bulletin
box, then try again.
You tried to store a document for polling in an
F-Code box which is set to be a security box.
Select an F-Code box which is set to be a bulletin
box, then try again.
The F-Code box . . code you entered isn't valid.
I D
Try re-entering your F-Code box . . code.
I D
You pressed a key which has no function for the
current operation.
The protection passcode you entered isn't valid.
Repeat the operation, entering the correct protec-
tion passcode.
What you see on the
LCD
Memory Overflow
Keep These Pages?
No Command Stored
No Department Code
No Document Stored
No Drum Unit
No Number Stored
No Protect Passcode
No Report
No Toner Cartridge
What it means/What to do
During transmission (or copying), you tried to
enter more pages into memory than your fax
could store. Press [Yes] to tell your fax to keep as
many pages in memory as possible, or press [No]
to delete from memory all pages stored during
this operation (but not previous operations).
You pressed . /
COMM CANCEL CONFIRM
upcoming commands, but your fax machine had
none stored.
You tried to turn on the department code setting
but there are no department codes stored in
your fax machine. Store at least one department
code, then try again.
. . . or . . .
You entered incorrect department code at fax
sending while the department feature is on.
Enter correct department code.
You tried to print a document from memory, but
your fax machine had none stored.
The drum unit is missing or has not been prop-
erly installed in your fax machine.
Please properly install the drum unit.
You selected an autodialer, batch box or F-Code
box number for which there is no fax (or phone)
number programmed. Either choose another
number or dial a phone number directly from the
numeric keypad.
You tried to program a security feature (see
page 3.52), but there's no protection passcode
stored in your fax machine. Store a protection
passcode in your machine, then retry.
You requested an activity journal or confirma-
tion report, but no fax jobs have occurred.
The toner cartridge is missing or has not been
properly installed in your fax machine. Please
properly install the toner cartridge.
to review