Redialing - imagistics 5000 Operating Manual

Redialing

Automatic fax redialing
If your fax call fails, your machine automatically redials it. In this Auto Redial
mode, your fax automatically redials the number up to three times (default settings) at
one minute intervals.
Note: You can change the number of redial, and interval settings. (See "Changing
redial settings," page 4.5.)
While in the Auto Redial mode, "AutoRedial" appears on the upper right of the
and the machine can continue to receive faxes and can make as many as 99 fax
transmissions.
Ready to Fax Ready to Fax AutoRedial AutoRedial
Sep 25 2001 11:00am Mem:100% Sep 25 2001 11:00am Mem:100%
Normal Normal Normal Normal
[ Mode ] [Contrast] [ Mode ] [Contrast]
Note: If you used either the
MONITOR
must redial manually (see below).
Note: If all redials fail, your machine may print (and/or display) error messages
(report printing can be disabled).
Redialing manually
You can always redial manually. And you must redial manually if you used either
the / key or an optional handset to dial the failed call.
MONITOR CALL
To redial a fax call manually without using the
optional handset:
1
Set the document and set the resolution and contrast.
2
Press ( ). The will show:
REDIAL LCD
View Redial History View Redial History
01:9-123-4567 01:9-123-4567
02:9-234-5678 02:9-234-5678
03:9-345-6789 03:9-345-6789
3
Your machine can remember the last 10 dialed numbers. Press
the dial number you want to redial appears.
4
Press .
START
/ key or a handset to dial the call, you
CALL
/ key or an
MONITOR CALL
or
To redial a fax call manually with the
handset:
1
Make sure the document is in the ADF and that the resolution and contrast
are set.
2
Press /
MONITOR
3
Press (
REDIAL
View Redial History View Redial History
01:9-123-4567
,
LCD
02:9-234-5678
03:9-345-6789
4
Your machine can remember the last 10 dialed numbers. Press
the dial number you want to redial appears.
5
When you hear fax tones from the remote unit, press
Note: If a person answers the phone, use the optional handset to tell that
person you're sending a fax. When you hear fax tones, press
To redial a voice call manually using the optional handset:
1
Lift the optional handset to get a dial tone.
2
Press (
REDIAL
View Redial History View Redial History
01:9-123-4567
02:9-234-5678
03:9-345-6789
3
Your machine can memory the latest 10 dialed numbers. Press
the dial number you want to redial appears.
4
Press .
START
When the other person answers, use the optional handset to speak to that
person.
until
/
MONITOR CALL
or lift the optional handset to get a dial tone.
CALL
). The will show:
LCD
). The will show:
LCD
Basic operation
key or an optional
or until
.
START
.
START
or until
2.5