imagistics 5000 Operating Manual page 95

Basic operation
10
Using the cursor key, select the mode you want. Then press
If you want to make another setting, repeat step 9 and 10.
Note: Choose "-----" if you do not want to specify for this programmable one-
touch key.
11
Select "Exit" and press
ENTER
12
Press to return your machine to standby mode.
STOP
Programming a Program key for F-Code polling
For this operation to work, two things must be true:
• The document which you're polling must exist in the remote fax's F-Code box (
standard sub-addressing/password box).
• You must know the remote fax's
box you want to poll.
To program an F-Code polling operating into a programmable one-touch key:
1
Follow steps 1–6 on pages 3.44–3.45.
2
Select "F-Code Polling" and press
F-Code Polling F-Code Polling
Enter Sub-Address Enter Sub-Address
_
3
Use the numeric keypad to enter the
you want to send the document.
4
Press . The shows:
ENTER LCD
F-Code Polling F-Code Polling
Enter Password Enter Password
_
Note: If there isn't a password for this box, press
5
Use the numeric keypad to enter the appropriate
Then press .
ENTER
6
If you want the polling to begin immediately every time you press the key,
proceed to step 7.
If you want to delay the polling, follow steps 7–9 on page 3.45.
3.48
ENTER
.
- sub-address and password (if any) for each
ITU T
. The shows:
ENTER LCD
- sub-address for the box to which
ITU T
, then skip to step 6.
ENTER
- password for the box.
ITU T
7
. Select "Exit" and press
The asks if you want to make option settings which includes; resolution,
LCD
contrast, memory transmission, report, cover page and Fax & Copy. If you
want to make any of these settings, select ON using the cursor key.
8
Press
ENTER
If you select ON, proceed to step 9.
If you select OFF, skip to step 12.
9
Using the cursor key, select the setting you want to specify for this program-
mable one-touch number. Then press
10
Using the cursor key, select the mode you want. Then press
If you want to make another setting, repeat step 9 and 10.
-
ITU T
Note: Choose "-----" if you do not want to specify for this programmable one-
touch key.
11
Select "Exit" and press
12
Press
STOP
.
ENTER
.
.
ENTER
.
ENTER
to return your machine to standby mode.
.
ENTER