Settings For Transmission; Scan Settings - imagistics 5000 Operating Manual

Settings for transmission

Scan settings

Default setting: Primary resolution: Normal, Primary contrast: Normal, Scan
width: B4
Three different settings tell your machine how to scan documents. The initial fac-
tory settings are probably right for most applications, so try using them before
changing any of these settings:
• Primary resolution mode — Sets the resolution for your documents. Choose
either normal, fine, superfine ("S-Fine" on the
• Primary contrast mode — Sets how light or dark you want faxed documents
to be when they arrive at their destinations.
• Scan width — Sets the scan width for your documents. Choose either B4 or
LTR/LGL.
Note: These settings you choose effect your fax activity only.
To set these modes:
1
Press , 2, 2, 0, 1, . The
MENU ENTER
01.Scan Parameters 01.Scan Parameters
Exit Exit
Primary Resolution :Normal Primary Resolution :Normal
Primary Contrast :Normal Primary Contrast :Normal
2
To set the primary resolution mode use the cursor key to select "Primary
Resolution" and then press
ENTER
01.Scan Parameters
Normal PHOTO
Fine
S-Fine
3
Select resolution mode you want to set using the cursor key, then press
.
ENTER
) or grayscale mode ("
LCD PHOTO
shows:
LCD
. The will show:
LCD
4
To set the primary contrast mode, select "Primary Contrast" and then press
. The will show:
ENTER LCD
01. Scan Parameters 01. Scan Parameters
Light
Normal Normal
Dark Dark
5
Select contrast mode you want to set using the cursor key, then press
").
6
To set the primary scan width, select "Scan Size" and then press
will show:
LCD
01.Scan Parameters 01.Scan Parameters
LTR/LGL LTR/LGL
B4 B4
7
Select scan width you want to set using the cursor key, then press
8
When you finished your choice, select "Exit" and then press
the settings.
By following the steps above, you've set your defaults for scanning. Before sending
documents, you can "override" these default scan settings for that transmission.
To override the default resolution and contrast settings before sending a document:
• Press [Mode] to change the resolution.
• Press [Contrast] to change the contrast.
Once your document is transmitted, your machine returns to its default settings.
Changing the default settings
.
ENTER
. The
ENTER
.
ENTER
to save
ENTER
4.1