imagistics 5000 Operating Manual page 13

Getting started
9
power switch — Turns your machine on and off.
AC
10
power jack — Where you plug in the
AC
11
Bypass tray — Open the bypass tray to use paper that is not loaded in the
paper cassette. It can hold up to 50 sheets of paper. For details about paper
capacity of the bypass tray, see "Specifications," page
12
Side cover — Open to fix a printout jam.
13
Side cover release — Pull this to open the side cover.
14
Recording paper size sticker — Shows the size of the paper that is set in
the paper cassette.
15
Recording paper level indicator — Shows the level of the paper supply
without requiring you to open the paper cassette.
16
Paper cassette — Load paper here. It can hold up to 500 sheets. For details
about paper capacity of the paper cassette, see "Specifications," page
1.2
power cord.
AC
.2.
AI
.2.
AI
LINE PHONE2 PHONE1
17
jack — Where you plug in the telephone line cord. The other end of the
LINE
cord plugs into a wall telephone jack.
18
2 jack — If you connect a second telephone to your machine, this is
PHONE
where you plug in the cord.
19
1 jack — Where you plug in the optional handset.
PHONE
20
port (optional) — Where you connect the printer cable,
PRINTER PARALLEL
when you use the optional printer controller.
21
RS-232C interface port (optional) — Where you connect the RS-232C
cable, when you use the optional RS-232C interface kit.
22
Extension paper tray — Holds the printout after it emerges.
23
Printed document exit — Where the printout emerges.
24
Handset (optional ) — Used for voice communication. This handset is avail-
able from your local Imagistics sales office, and can be added when you
purchase the 5000 or as an upgrade afterward.