Handling Paper Jams; Scan Parameter Settings - imagistics ipc1-im8130 Operator's Manual

3 To finish scanning, press F
Template Selection List screen opens. The scanned image data is
saved on the controller hard disk.

Handling Paper Jams

In the event of a paper jam, the copier displays procedures on the control
panel to assist you with resolving the problem. When the jam is cleared,
the message Jam Recovery appears on the screen.
Continuing after Clearing a Jam
Press
Cancelling a Job after Clearing a Jam
1 Press C
opens.
2 Press Y
Error Handling
When you are using the ADF, if the job stops due to an error, such as Job
Overflow, during the continuous scanning of multiple originals, data
being read at the time of the error is canceled.
Data that was read before the error occurred is stored.
Note: Template settings can be edited from the Printer Utility (End
User Mode) web site.

Scan Parameter Settings

A template icon represents each template that was set up using the
Printer Utility. Scan parameters, such as resolution, rotation, and
exposure are defined when you create the templates.
The Scan Settings and Agent Settings Summary screen displays the
settings for the template you selected.
To change these scan parameter settings:
ipc1-im8130 Scan Operator's Guide
or S ! to continue the ADF scan.
START CAN
or
J
ANCEL OB
to cancel the Job. To prevent cancellation, press N
ES
. When scanning is complete, the
INISH
to cancel a job. The Cancel Confirm screen
FC
.
O
31