Table of Contents
Advertisement
3
Press
. The
shows:
ENTER
LCD
02. Erase One-touch
Ok to Erase?
01 : 123-4567
[
Yes
] [
No
Important: If you want to quit without erasing the one-touch number
you've selected, press [No]. The fax will return to step 2.
4
Press [Yes] to erase the number.
To erase another one-touch number, repeat steps 2–4.
Otherwise, press
to return to standby mode.
STOP
Printing a list of one-touch numbers
Forgot which number is stored in which one-touch key? Just print a list of your one-
touch numbers. The list includes each key's number, the Location
fax/telephone number you've stored in the key.
To print a list of one-touch numbers, press
One-touch fax dialing
To dial a fax call using a one-touch number:
1
Place the the document in the
2
Adjust resolution and contrast if necessary.
3
Press the one-touch key in which you've stored the number.
What happens next depends on whether you specified memory transmission or
real time transmission:
If you specified Quick Memory transmission:
• Your fax machine scans the first page of your document into memory, then dials
the other fax machine.
• While dialing, your machine scans the other documents into memory.
• The
shows the Location
and the document's width and resolution settings:
LCD
ID
Note: If the one-touch key doesn't have a Location
• When the other machine answers, your fax transmits the scanned document
directly from memory. (To review Quick memory transmission, see page 2.2.)
]
(if any) and
ID
, 5, 1, 0, 5,
.
MENU
ENTER
.
ADF
, the number appears.
ID
If you specified normal memory transmission:
• Your fax machine scans your entire document into memory first, then dials the
other fax machine.
• The
shows the Location
and the document's width and resolution settings:
LCD
ID
Note: If the entry doesn't have a Location
• When the other machine answers, your fax transmits the document directly from
memory. (To review Memory transmission, see page 2.2.)
If you specified real time transmission:
• Your fax machine dials the other fax machine.
• The
shows the Location
and the document's width and resolution settings:
LCD
ID
Note: If the entry doesn't have a Location
• When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes. (To review Real time transmission, see page 2.3.)
One-touch phone dialing
To dial a phone call using a one-touch number, you must have an optional handset
attached to your machine.
To make the call:
1
Obtain a dial tone by doing one of the following:
• Lift the optional handset
• Press
/
to use the monitor speaker
MONITOR
CALL
2
Press the one-touch key in which you've stored the number. As the machine
dials, it shows the number on the
Telephone
123-4567_
Normal
Normal
Normal
Normal
[ Tone ] [ Mode ] [ Contrast ]
[ Tone ] [ Mode ] [ Contrast ]
Note: Remember that your fax machine's monitor speaker is not a speakerphone.
If you dialed by using the monitor speaker, pick up the handset to speak to
the person that answers.
Note: If the call fails, and you used
hang up.
, the number appears.
ID
, the number appears.
ID
:
LCD
/
to dial, press
MONITOR
CALL
MONITOR
Basic operation
/
to
CALL
3.3
Advertisement
Table of Contents
