Table of Contents
Advertisement
Level one function
Level two function
2. User Settings
4.Printer Settings*
5.Scanner Settings*
3. Other Settings
1.Journal & Reports
2.Cover Page
3.Department Code
4.Program One-Touch
5.F-Code Box
6.Batch Tx
7.Scan Box*
8.Internet Fax*
4. Doc. Management 1.Store Document
2.Erase Document
*1: This option appears only if the optional Internet fax kit has been installed. For details see the operating instructions included with the Internet fax kit.
*4: This option appears only if the optional NIC (network interface card) has been installed.
*5: This option appears only if the optional printer controller has been installed. For details see the operating instructions included with the printer controller kit.
Level three function
4
01.TCP/IP
01.Scan Parameter
5
02.Auto Reset
01.Journal Auto Print
02.Journal Line Up
03.Report
01.Set Cover Page
02.Cover Page Message
01.Department Code Protect Protection for department code settings.
02.Enter Department Code Register the Department code.
03.Department Setting
04.Erase Department TimeList Clear the total counts of each department code.
01.Enter P One-touch
02.Erase P One-touch
01.Set F-Code Box
02.Erase F-Code Box
01.Set Batch Box
02.Erase Batch Box
01.Set Scan Box
5
02.Erase Scan Box
1
01.TCP/IP
02.MAC Address
03.Default Relay
01.Polling Document
02.F-Code Document
01.Polling Document
02.F-Code Document
03.Batch Tx Document
04.Scan Box Document*
Summary of setting
Enter the IP Address, Subnet mask and Gate way address.
Enter the scanning parameters.
Set the time (minutes) for resetting the scan parameters and .
returning to the Fax mode.
Print the Activity journal automatically after 100 transactions.
Change the printing order of the activity journal.
Print the TCR automatically at every transmission.
On/Off setting for sending the Cover page.
Enter your message for the cover page.
On/Off setting for Department code activation.
Program several operations for a function you frequently use.
This key can reduce several steps to a simple press of a key.
Erase the programming in a programmable one-touch key.
Create the F-Code box.
Erase an empty F-Code box.
Create the Batch box.
Erase an empty batch box.
Create the Scan box.
Erase an empty scan box.
Set the TCP/IP address.
Enter the Media Access Control Address for network card.
Setting of relay box.
Store the document to be retrieved by other fax machine.
Store the document to be retrieved by other F-Code compatible
fax machine.
Erase stored document for polling transmission.
Erase stored document in the F-Code box.
Erase stored document in the Batch box.
5
Erase stored document in the Scan box.
Getting started
Default setting
Page
—
—
—
—
3 minutes
—
On
3.28
Off
3.29
Off
3.29
Off
3.31
—
3.31
Off
3.59
—
3.58
Off
3.58
—
3.59
—
3.44
—
3.51
—
3.34
—
3.41
—
3.12
—
3.14
—
—
—
—
—
—
—
—
—
—
—
3.15
—
3.38
—
3.16
—
3.39
—
3.14
—
—
1.15
Advertisement
Table of Contents
