imagistics 5000 Operating Manual page 92

5
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
be up to 40 characters in length:
Your display can show only 30 characters at a time. To view characters beyond
those 30, press to scroll to the left or
6
Press . The now asks which operation you want to program into the
ENTER LCD
programmable one-touch:
57:123-4567 57:123-4567
Exit Exit
Delayed Transmit Delayed Transmit : --/--:-- : --/--:--
Polling Polling : OFF : OFF
7
Select "Delayed Transmit" and press
Delayed Transmit Delayed Transmit
Enter Transmit Time Enter Transmit Time
--/--:-- _
[ Clear ] [ Clear ]
8
Tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed Transmit Delayed Transmit
Enter Transmit Time Enter Transmit Time
_ 30/17:05 30/17:05
Option 2: Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 and
then the time the fax should perform the command:
Delayed Transmit Delayed Transmit
Enter Transmit Time Enter Transmit Time
_ 00/17:05 00/17:05
9
Press .
ENTER
to scroll to the right.
. The shows:
ENTER LCD
on the 30th.")
PM
[ Clear ]
today.")
PM
[ Clear ]
10
Select "Exit" and press
ENTER
01.Set P One-touch 01.Set P One-touch
Option Settings Option Settings
ON ON
OFF OFF
The asks if you want to make option settings which includes; resolution,
LCD
contrast, memory transmission, report, cover page and Fax & Copy. If you
want to make any of these settings, select ON using the cursor key.
11
Press .
ENTER
If you select ON, proceed to step 12.
If you select OFF, skip to step 16.
12
The shows:
LCD
01.Set P One-touch 01.Set P One-touch
Exit
Resolution Resolution :------
Contrast Contrast :------
13
Using the cursor key, select the setting you want to specify for this program-
mable one-touch number. Then press
14
Using the cursor key, select the mode you want. Then press
If you want to make another setting, repeat step 13 and 14.
Note: Choose "-----" if you do not want to specify for this programmable one-
touch key.
15
Select "Exit" and press
ENTER
16
Press to return your machine to standby mode.
STOP
. The shows:
LCD
.
ENTER
.
ENTER
.
Basic operation
3.45