imagistics 5000 Operating Manual page 104

5
The shows:
LCD
10. Block Junk Fax 10. Block Junk Fax
01: 01:
[ Erase ] [ Erase ]
6
If you want to modify an existing entry in the blocked numbers list, select the
number you want to modify using the cursor key.
... or ...
If you want to enter a new number in an already-started blocked numbers
list, select an empty position in the list.
Then press to enter or modify the blocked number.
ENTER
Note: To clear a number from the list, see "Clearing a number from the
blocked numbers list," next column.
7
Use the numeric keypad to enter the last eight characters of a fax number you
want to block. For example, if you want to block a fax from someone with a
Subscriber of 972-555-3038, you should enter 5, 5, 5,
ID
3, 8:
02: 02:
Enter Fax Number Enter Fax Number
555-3038_ 555-3038_
To change a specific digit, press
cursor is under the digit, then use the numeric keypad to enter the correct
number.
8
Press to save the setting. The
ENTER
numbers list.
If you do not want to enter or change a number for this slot, go on to step 9.
If you do want to enter or change a number for this slot, repeat steps 6–8.
9
Press to return your machine to standby mode.
STOP
/
PAUSE DIAL OPT
to move left or to move right until the
shows the next "slot" in the blocked
LCD
Clearing a number from the blocked numbers list
To clear a number from the list:
1
Press , 2, 2, 1, 0,
MENU
10.Block Junk Fax 10.Block Junk Fax
Exit
Block Junk Fax Mode Block Junk Fax Mode
2
Using the cursor key, select "Block Junk Fax Mode" and press
shows:
LCD
10. Block Junk Fax 10. Block Junk Fax
OFF OFF
Mode 1 Mode 1
Mode 2 Mode 2
3
Select Mode 2 or Mode 3. The
., 3, 0,
10. Block Junk Fax
01: 987-6543
02:
4
Using the cursor key, select the number you want to clear.
5
Press [Erase] to clear the number. The
10. Block Junk Fax 10. Block Junk Fax
Ok to Erase? Ok to Erase?
01:987-6543
Important: If you want to quit without erasing the number you've selected,
press [No]. The fax will return to step 4.
6
Press [Yes] to clear the number.
To clear another number from the blocked numbers list, repeat steps 4–6.
Otherwise, go on to step 7.
7
Press to return your machine to standby mode.
STOP
Printing a list of the blocked numbers
Forgot which number is stored in the blocked number list? Just print a list of the
blocked numbers.
To print a list of the blocked numbers, press
. The shows:
ENTER LCD
Mode 3 Mode 3
shows:
LCD
[ Erase ]
shows:
LCD
[ Yes [ Yes ] [ ] [ No No ] ]
, 5, 1, 0, 8,
MENU
Basic operation
. The
ENTER
.
ENTER
3.57