imagistics 5000 Operating Manual page 17

Getting started
3
Unpack a new toner cartridge from its
carton. Then, holding the toner car-
tridge with both hands, slowly shake it
to distribute the toner evenly inside the
cartridge.
Note: Do not touch the roller in the
toner cartridge.
4
Gently install the toner cartridge in
the printer, making sure the toner car-
tridge's two pins fit in the slits inside
the printer frame.
5
Unpack the drum unit from its carton.
Note: Shield the drum unit from light, especially strong light. Later, if you
have to remove the drum from the machine, immediately wrap it in a
thick cloth to protect it from light.
6
Gently install the drum unit in the
printer, making sure the drum unit's
four pins fit in the slits inside the
printer frame.
1.6
7
Gently clean the LED print head
using the cleaning paper included in
the toner cartridge carton box.
For best print quality, you should
clean the LED head every time you
change the toner cartridge.
Note: Do not use abrasive materials
on the LED print head, and do
not subject it to heavy pres-
sure
8
Gently close the printer cover.
9
Close the top cover.
Note: The machine will not operate unless the cover is properly closed.