imagistics 5000 Operating Manual page 98

13
The will shows:
LCD
01.Set P One-touch 01.Set P One-touch
Exit Exit
Resolution Resolution :------
Contrast Contrast :------
14
Using the cursor key, select the setting you want to specify for this program-
mable one-touch number. Then press
15
Using the cursor key, select the mode you want. Then press
If you want to make another setting, repeat step 14 and 15.
Note: Choose "-----" if you do not want to specify for this programmable one-
touch key.
16
Select "Exit" and press
ENTER
17
Press to return your machine to standby mode.
STOP
Fax dialing with programmable one-touch
To dial a fax call using a programmable one-touch number:
1
Set your document in the
ADF
2
Make any necessary adjustments as usual.
3
Press the programmable one-touch key in which you've stored the fax commu-
nication command.
Your fax will perform the operation now, or at whatever time you programmed.
Note: To review the details of each operation, review the instructions for that
operation. See page 3.44 for a list of each operation and where to find it.
If you programmed this key to delay its operation, the
Ready to Fax Ready to Fax Reserved Reserved
Sep 25 2001 11:00am Sep 25 2001 11:00am Mem: 99% Mem: 99%
Normal Normal Normal Normal
[ Mode ][ Contrast ] [ Mode ][ Contrast ]
If you programmed this key to perform the operation immediately after you press it,
the shows the number:
LCD
Press START Key Press START Key
972-555-4335 972-555-4335
LTR LTR Normal Normal Normal Normal
[ [ Mode Mode ] [ Contrast ] ] [ Contrast ]
.
ENTER
ENTER
.
.
shows:
LCD
Printing a list of your programmable one-touch keys
You fax machine can print a list of the commands you've stored in your programma-
ble one-touch keys.
The list includes:
(1) each key's one-touch number
(2) the fax/telephone number
(3) when the command should start
(4) which command you've selected
(5) if applicable, the selected call group(s) or F-Code box(es) you've stored in
.
the key
(6) the individual settings for each key
To print a list of programmable one-touch keys, press
Erasing a programmable one-touch key
1
Press
MENU
02.Erase P One-touch 02.Erase P One-touch
Select P.One-touch (57-60) Select P.One-touch (57-60)
57:234-5678
2
Select the programmable one-touch key you want to erase.
Note: You can select the programmable one-touch key by pressing that key
on the control panel.
3
Press
ENTER
02.Erase P One-touch
OK to Erase?
57:234-5678
Important: If you want to quit without erasing the one-touch number
4
Press [Yes] to erase the number.
To erase another program one-touch number, repeat steps 2–4. Or press
return to standby mode.
, 3, 4, 0, 2. The shows:
LCD
. The shows:
LCD
[ Yes ] [ No ]
you've selected, press [No]. The fax will return to step 2.
Basic operation
, 5, 1, 1, 1, .
MENU ENTER
to
STOP
3.51